The cart is empty.
Dealers. First. Always.
DWG

FVTRDS1A Comnet Bi-directional Digitally Encoded Video Transmitter or Sync + Data Transceiver, sm, 1 fiber

SKU: FVTRDS1A
  • 10-bit digital bi-directional video transmission or video sync + bi-directional data
  • Exceeds all requirements for RS-250C short-haul transmission: True broadcast video performance
  • Supports RS232, RS422 or RS485 (2 or 4-wire) data interfaces
  • Compatible with all NTSC, PAL, or SECAM CCTV camera systems
  • Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
  • Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events.
  • Automatic resettable fuses on all power lines
  • Hot-swappable rack modules
More details...
MSRP Price: $2,782.50
Online Price: $2,260.75
Save to my Wish List

DWG Dealer Price : ---


Dealers - click here to set up your dealer account today.

Existing DWG Customers - Log In to view your current dealer pricing.



Previous Item   Next Item
Product Details

The ComNet FVTRD(M)(S)1 series video transmitter/ receiver and data transceiver supports simultaneous transmission of short-haul quality 10-bit bi-directional digital video or video sync plus bi-directional data over one multimode or single mode optical fiber. The module is universally compatible with major CCTV camera manufacturers and supports RS232, RS422 and 2 or 4-wire RS485 data interfaces, and most major data protocols. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for rapidly ascertaining equipment operating status. Packaged in the exclusive ComNet ComFit housing, these units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.


Specifications


Video

  • Video Input - 1 volt pk-pk (75 ohms)
  • Overload - >1.5V pk-pk
  • Bandwidth - 5 Hz - 10 MHz
  • Differential Gain - <2%
  • Differential Phase - <0.7°
  • Tilt - <1%
  • Signal-to-Noise Ratio (SNR) - 67 dB @ Maximum Optical Loss Budget
  • Max. RG-59 COAX Distance - 100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth

Data

  • Data Format - RS232, RS422, 2 or 4-wire RS485 w/Tri-State, Manchester and bi-phase
  • Data Rate - DC-115 Kbps (NRZ)
  • Wavelength - 1310/1550 nm, MM and SM
  • Number Of Fibers - 1
  • Optical Emitter - Laser Diode

Led Indicators

  • Video
  • Received Data
  • Transmitted Data
  • Optical Carrier Detect

Connectors

  • Optical
    • ST (Standard)
    • SC or FC (Optional)
  • Power - Terminal Block
  • Video - BNC (Gold Plated Center-Pin)
  • Data - Terminal Block

Electrical & Mechanical

  • Power Surface Mount - 8-15 VDC @ 2W
  • Rack Mount - From Rack
  • Number of Rack Slots - 1
  • Current Protection - Automatic Resettable Solid-State Current Limiters
  • Circuit Board - Meets IPC Standard
  • Size (in./cm) (L×W×H) - 6.1 × 5.3 × 1.1 in., (15.5 × 13.5 × 2.8 cm)
  • Shipping Weight - <2 lb./0.9 kg

Environmental

  • MTBF - >100,000 hours
  • Operating Temp - -40° C to +75° C
  • Storage Temp - -40° C to +85° C
  • Relative Humidity - 0% to 95% (non-condensing)

FVTRDS1A Specifications PDF

FVTRDS1A Manual


Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In