The cart is empty.
Dealers. First. Always.
DWG

FVT40SFP Comnet 4-Channel Digitally Encoded Video Transmitter

SKU: FVT40SFP
  • Up to four 10-bit digital video channels
  • Uses interchangeable SFPs for fiber type, distance and connector
  • Exceeds all requirements for RS-250C medium haul transmission
  • Compatible with all NTSC, PAL, or SECAM CCTV camera systems
  • Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment.
  • Voltage transient protection on all power and signal input/output lines provides unconditional protection from power surges and other voltage transient events.
  • Automatic resettable fuses on all power lines
  • Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
More details...
MSRP Price: $2,310.00
Online Price: $1,877.00
Save to my Wish List

DWG Dealer Price : ---


Dealers - click here to set up your dealer account today.

Existing DWG Customers - Log In to view your current dealer pricing.



Previous Item   Next Item
Product Details

The ComNet FVT/FVR40SFP series optical video link provides four 10-bit medium-haul quality digital video channels, using optical small form factor pluggable modules (SFP).
Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided for confirming operating status. These units are interchangeable between stand-alone or card mount configurations.


Specifications


Video

  • Video Input - 1 volt pk-pk (75 ohms)
  • Overload - >1.5U pk-pk
  • Bandwidth - 5 Hz - 6.5 MHz
  • Differential Gain - <2%
  • Differential Phase - <0.7º
  • Tilt - <1%
  • Signal-to-Noise Ratio (SNR) - 67 dB @ Maximum Optical Loss Budget
  • Max. RG-59 COAX Distance - 100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth
  • Wavelength - SFP (Small Form-Factor Pluggable) dependent
  • Number of Fibers - SFP (Small Form-Factor Pluggable) dependent
  • Optical Emitter - SFP (Small Form-Factor Pluggable) dependent

Led Indicators

  • Fiber Status - Video Sync Presence
  • Power

Connectors

  • Optical - SFP modules
  • Power - Terminal Block
  • Video - BNC

Electrical & Mechnical

  • Power Surface Mount - 8-15 VDC @ 3W
  • Rack Mount - From Rack
  • Number of Rack Slots - 1
  • Current Protection - Automatic Resettable Solid-State Current Limiters
  • Circuit Board - Meets IPC Standard
  • Size (in./cm) (L×W×H) - 6.1 x 5.3 x 1.1 in., (15.5 x 13.5 x 2.7 cm)
  • Shipping Weight - <2 lb./0.9 kg

Environment

  • MTBF - >100,000 hours
  • Operating Temp - -40° C to +75° C
  • Storage Temp - -40° C to +85° C
  • Relative Humidity - 0% to 95% (non-condensing)

FVT40SFP Specifications PDF

FVT40SFP Manual


Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In