The cart is empty.
Dealers. First. Always.
DWG

FDC80RS1 Comnet 8 Channel Contact Closure Receiver SM 1 Fiber

SKU: FDC80RS1
  • Transmits up to eight independent supervised or unsupervised dry switch or relay contacts over one optical fiber, or via a 2-wire RS-485 point-to-point copper circuit
  • Microprocessor-based logic and latching relays in the receiver unit eliminate random contact closure states in the event of a loss of the link, or a loss of prime operating power
  • Tested and certified by an independent laboratory for full compliance with the environmental requirements (ambient operating temperature, mechanical shock, vibration, humidity with condensation, high-line/low-line voltage conditions and transient voltage protection) of NEMA TS-1/TS-2 and the Caltrans Specification for Traffic Signal Control Equipment
  • Indicating LEDs for monitoring power, contact closure status, and summary fault
  • Automatic resettable solid-state current limiters
  • Hot-swappable rack modules
  • Interchangeable between stand-alone or rack mount use – ComFit
  • Lifetime Warranty
More details...
MSRP Price: $1,773.00
Online Price: $1,440.50
Save to my Wish List

DWG Dealer Price : ---


Dealers - click here to set up your dealer account today.

Existing DWG Customers - Log In to view your current dealer pricing.



Previous Item   Next Item
Product Details

The ComNet FDC80 Series contact closure transmitter and receiver units provide transmission of up to eight independent supervised or unsupervised dry switch or relay contact closures over a single optical fiber, or any two-wire RS-485 copper circuit. Microprocessor-based logic transmits the contact closure information in packets that are ordered and encoded, ensuring extremely robust and reliable transmission. Packets that are garbled, or packets out of sequence with transmission bit errors will not cause random changes of state in the FDC80R receiver unit relays.


Specifications


Contacts

  • Input/Output Channels - 8
  • Input Contacts - Normally open or normally closed
  • Output Contacts Rating - 30 VDC, 1A, resistive load only, normally open
  • Response Time - 25 msec, typ. 35 msec, max
  • Summary Fault Alarm - 1 (RX Only), dry relay contacts, Form C, 30 VDC 1A, non-latching

LED Indicators

  • Contact
  • Power
  • Summary Fault

Power

  • Operating Voltage Range - 8 to 15 VDC (or from C1 Rack, sold separately)
  • Power Consumption - 3 W Max

Electrical & Mechanical

  • Rack Slots - 1 (Transmitter), 2 (Receiver)
  • Current Protection - Automatic Resettable Solid-State Current Limiters
  • Circuit Board - Meets IPC Standard
  • Size (L×W×H) - Transmitter: 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm), Receiver: 6.1 × 5.3 × 2.2 in (15.5 × 13.5 × 5.6 cm)
  • Shipping Weight - <2 lb./0.9 kg

Connectors

  • Contact Input - Screw Terminals
  • Contact Output - Screw Terminals
  • Power - Screw Terminals
  • Summary Fault Alarm: - Screw Terminals

Enivernomental

  • MTBF - >100,000 hours
  • Operating Temp - -40 ̊ C to +75 ̊ C
  • Storage Temp - -40˚ C to +85˚ C
  • Relative Humidity - 0% to 95% (non-condensing)¹

FDC80RS1 Specifications PDF

FDC80RS1 Manual


Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In