CNMCSFP-M Comnet 10/100/1000Mbps Multi-Rate Media Converter 100FX/1000FX Selectable

The ComNet CNMCSFP electrical-to-optical Ethernet media converters accept a 10/100 or 1000 Mbps electrical input and converts this to a 100 or 1000 Mbps optical output (selected by a dip switch‡) and the 100/1000 Mbps optical input back to the 10/100/1000 Mbps electrical output. “Auto-Negotiating” is supported on the copper interface side. These devices use either one or two optical fibers, depending upon the selection of sold-separately SFP† optical module. A PoE model, the CNMCSFPPOE/M meets the IEE802.3at standard and provides 30 watts of PoE+ power. The series consists of a small-size single channel model, CNMCSFP/M; a ComFit standard size, single-channel model, CNMCSFP; a dual channel model, CNMC2SFP; and a quad channel model, the CNMC4SFP.

Specifications

Data

• Data Interface - Ethernet
• Data Rate
  • 10/100/1000 Mbps
  • IEEE 802.3 Compliant
  • Full Duplex or Half Duplex Electrical Port/Full Duplex Optical Port

Connectors

• Power - Terminal Block
• Optical - SFP Dependent
• Electrical - RJ45
• Fiber Connectors - Requires selection of sold-separately SFP modules. See ComNet data sheet for number and description of SFP modules

Power

• Operating Voltage Range - Non-PoE: 9-24 VDC or 24 VAC, PoE: 48 – 57 VDC @ 0.85A
• Power Consumption - CNMCSFPPOE/M: 35W (with full PoE+ load) Surface Mount: 2.5W 1Ch, 5W 2Ch, 10W 4Ch
• Current Protection - Automatic Resettable Solid-State Current Limiters

Electrical & Mechanical

• LED Indicators
  • Optical Link/Data Activity
  • Power
  • POE Enabled (CNMCSFPPOE/M only)
• Circuit Board - Meets IPC Standard
• ComFit Size - 6.1 × 5.3 × 1.1 in (15.5 × 13.5 × 2.8 cm)
• ComFit Rack Slots - 1
• Mini Size - 3.3 x 2.5 x 1.1 in (8.4 x 6.4 x 2.8 cm)

Environmental

• MTBF - >100,000 hours
• Operating Temp - -40˚ C to +75˚ C
• Storage Temp - -40˚ C to +85˚ C
• Relative Humidity - 0% to 95% (non-condensing)

CNMCSFP-M Specifications PDF

CNMCSFP-M Manual