CNGE2FE24MSPoE Comnet 2 Port 1000Mbps + 24 Port 100Mbps Managed Switch, Power Over Ethernet, Power Supply PS48VDC-10A recommended and sold seperately

The ComNet CNGE2FE24MSPOEPoE Managed Ethernet Switch provides transmission of (24) 10/100 BASE-TX and (2) 10/100/1000T(X) or 1000FX combo ports. Unlike most Ethernet switches, these environmentally hardened units are designed for deployment in difficult operating environments, and are available for use with either conventional CAT-5e copper or optical transmission media. The 24 electrical ports support the 10/100 Mbps Ethernet IEEE 802.3 protocol, and auto-negotiating and auto-MDI/MDIX features are provided for simplicity and ease of installation. All 24 ports support IEEE.802.3af Class 1 ™ 3 based Power over Ethernet (PoE). 2 ports are 10/100/1000 configurable for copper or fiber media for use with multimode or singlemode optical fiber, selected by optional SFP modules. These network managed layer 2 switches are optically (1000 BASE-FX) and electrically compatible with any IEEE 802.3 compliant Ethernet devices. Plug-and-play design ensures ease of installation, and no electrical or optical adjustments are ever required.

Specifications

• Switch Architecture - Back-plane (Switching Fabric) - 8.8Gbps Packet throughput ability (Full Duplex) - 13.1 Mpps @64bytes
• Transfer Rate
  • 14,880pps for Ethernet port
  • 148,800pps for Fast Ethernet port
  • 1,488,000pps for Gigabit Fiber
  • Ethernet port
• Packet Buffer- 4Mbits
• Mac Address - 8K MAC address table
• Flash ROM - 4Mbytes
• DRAM - 32Mbytes
• Jumbo Frame - 9022bytes (for Gigabit ports)
• Connectors (Front)
  • RS232 - Female DB-9 (for Console)
  • 10/100TX - 24 ™ RJ45
  • Combo
    • 2 ™ 10/100/1000T
    • 2 ™ SFP 1000FX
• Indicating LEDs
  • Gigabit Fiber - Link/Activity (Green)
  • Gigabit Copper - Link/Activity (Green)
  • Full Duplex/Collision (Amber)
  • Mini GBIC Link/Activity (Green)
• PoE pin assignment
  • RJ45 port #1 - #24 support IEEE802.3af End-point
  • Alternative A mode.
  • Positive (VCC+) - RJ45 pin 1, 2
  • Negative (VCC-) - RJ45 pin 3, 6
  • Data (1, 2, 3, 6)
  • System Power (Green)
• Max. PoE current per port - 350mA continuous
• Power
  • Power Supply - 45V- 52V DC (sold separately)
  • Redundant Power Supply - 45V- 52V DC
  • Max. Power Consumption - 400 Watts
• Mechanical
  • Case Dimensions - 17.32 ™ 11.0 ™ 1.73 in (44.0 ™ 28.0 ™ 4.4 cm)
  • Installation> - 19™ Rack Mount
  • Cooling - Natural convection.
• Environmental
  • MTBF - >100,000 hours
  • Operating Humidity - 5% to 95% (Non-condensing)
  • Operating Temperature - -40˚C to 75˚C
  • Storage Temperature - -40˚C to 85˚C (Functional to 85™C)
• Compliance
  • EMI - FCC Class A, CE EN61000-4-2 (ESD), CE EN61000-4-3 (RS), CE EN61000-4-4 (EFT), CE EN61000-4-6 (CS),CE EN61000-4-8, CE EN61000-6-2, CE EN61000-6-4, UL, cUL, CE/EN60950-1
  • IETF RFC Compliance - RFC768-UDP, RFC783-TFTP, RFC791-IP RFC792-ICMP, RFC793-TCP, RFC827-ARP, RFC854-Telnet, RFC894-IP over Ethernet,RFC1112-IGMP v1, RFC1519-CIDR, RFC1541-DHCP (client), RFC2030-SNTP, RFC2068-HTTP, RFC2236-IGMP v2, RFC2475-Differentiated Services,RFC2865-Radius, RFC3414-SNMPv3-USM, RFC3415-SNMPv3-VACM
  • IETF SNMP MIBS - RFC1493-BRIDGE-MIB, RFC1907-SNMPv2-MIB, RFC2012-TCP-MIB, RFC2013-UDP-MIB, RFC2578-SNMPv2-SMI, RFC2579-SNMPv2-TC, RFC2819-RMON-MIB, RFC2863-IF-MIB, draft-ietf-bridgerstppmib-03-BRIDGE-MIB, draft-ietf-bridgebridgemib-smiv2-03-RSTP-MIB, IANAifType-MIB
  • Stability TestingM
    • IEC60068-2-32 (Free fall)
    • IEC60068-2-27 (Shock)
    • IEC60068-2-6 (Vibration)

CNGE2FE24MSPoE Specifications PDF

CNGE2FE24MSPoE Installation Manual