The cart is empty.
Dealers. First. Always.
DWG

PXB-100ATC TAKEX Anti-Crawl Photoelectric Beam Sensor

SKU: PXB-100ATC
  • Independent control of upper and lower beams
  • Choose between synchro-quad and anti-crawl operation
  • Dual outputs for crawl attempt and full beam break
  • Sync-wire allows unlimited stacking without crosstalk
  • 4 x Selectable beam channels
  • Increased beam separation minimises nuisance alarms
  • Vivid internal colour aids beam alignment procedure
  • Lightning and surge protection up to 15kV
  • IP65 housing
More details...
MSRP Price: $1,060.00
Online Price: $1,060.00
Save to my Wish List
Product Details

Our PXB-100ATC photoelectric beam sensors were developed for high-risk applications where detection of all intrusion attempts is critical.


Specifications

  • Model - PXB-100ATC
  • Detection system - Near infrared pulsed beam interruption system Anti-crawling, Anti-corrosion)
  • Infrared beam - Double modulation pulsed beam by LED
  • Protection distance - Outdoor 330' (100m) or less
  • Response time
    • AT output - 0.05sec by upper/lower level simultaneous interruption, 0.1/0.2/0.3/0.5sec by either level interruption
    • HF output - 0.05sec by upper/lower level simultaneous interruption
  • Power supply - 12 to 30V DC (Non-polarity)
  • Current consumption - Transmitter : 27mA Receiver : 48mA
  • Alarm output
    • Dry contact relay output N.O./N.C. selectable
    • Contact action : Interruption time (Min.2sec.)
    • Contact capacity : 30V (AC/DC) 0.25A (resistive load)
    • Protective resistor
  • Environmental output
    • Dry contact relay output N.O./N.C. selectable
    • Action : Activated when weather condition gets worse (Min.5sec.)
    • Contact capacity : 30V (AC/DC) 0.25A (resistive load)
    • Protective resistor
  • Tamper output
    • Dry contact (N.C.)
    • Action : Activated when cover is detached
    • Contact capacity : 30V (AC/DC) 0.1A (resistive load)
    • Protective resistor
  • Alarm LED - Red LED (Receiver) ON : when an alarm is initiated
  • Attenuation LED - Red LED (Receiver) ON : when beam is attenuated
  • Ambient temperature range - -31°F to+151°F(-35 to +66℃)
  • Beam adjustment - Horizontal: ±90°, Vertical: ± 20°
  • Functions - Modulated beam frequency selection,Tone indicator, Environmental module, Beam power selection, Transmitting power adjutment, Programmed AGC, Auto-gain lock function, Monitor Jack, Tamper, Response time adjustment, Upper/lower beam switch Wireless checker
  • Mounting positions - Outdoor, Indoor
  • IP rating - 65
  • Wiring - Terminals
  • Weight - Transmitter : 49oz (1,400g) Receiver : 52.5oz (1,500g)
  • Appearance - Resin (wine red)

PXB-100ATC Specifications PDF

Check out some additional items that you may need to purchase with this product:
Check the check boxes next to the additional products that you would like to add to the shopping cart, then click on the "Add to Cart" button above. A check box is not shown if a product requires that you select an option or fill out a field. () indicates a required accessory.

Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In