PXB-100ATC TAKEX Anti-Crawl Photoelectric Beam Sensor
|
|
|
SKU: PXB-100ATC
- Independent control of upper and lower beams
- Choose between synchro-quad and anti-crawl operation
- Dual outputs for crawl attempt and full beam break
- Sync-wire allows unlimited stacking without crosstalk
- 4 x Selectable beam channels
- Increased beam separation minimises nuisance alarms
- Vivid internal colour aids beam alignment procedure
- Lightning and surge protection up to 15kV
- IP65 housing
More details...
|
DWG Dealer Price : ---
Dealers - click here to set up your dealer account today.
Existing DWG Customers - Log In to view your current dealer pricing.
|
|
|
PXB-100ATC TAKEX Anti-Crawl Photoelectric Beam Sensor
|
|
|
|
Product Details
|
Our PXB-100ATC photoelectric beam sensors were developed for high-risk applications where detection of all intrusion attempts is critical.
Specifications - Model - PXB-100ATC
- Detection system - Near infrared pulsed beam interruption system Anti-crawling, Anti-corrosion)
- Infrared beam - Double modulation pulsed beam by LED
- Protection distance - Outdoor 330' (100m) or less
- Response time
- AT output - 0.05sec by upper/lower level simultaneous interruption, 0.1/0.2/0.3/0.5sec by either level interruption
- HF output - 0.05sec by upper/lower level simultaneous interruption
- Power supply - 12 to 30V DC (Non-polarity)
- Current consumption - Transmitter : 27mA Receiver : 48mA
- Alarm output
- Dry contact relay output N.O./N.C. selectable
- Contact action : Interruption time (Min.2sec.)
- Contact capacity : 30V (AC/DC) 0.25A (resistive load)
- Protective resistor
- Environmental output
- Dry contact relay output N.O./N.C. selectable
- Action : Activated when weather condition gets worse (Min.5sec.)
- Contact capacity : 30V (AC/DC) 0.25A (resistive load)
- Protective resistor
- Tamper output
- Dry contact (N.C.)
- Action : Activated when cover is detached
- Contact capacity : 30V (AC/DC) 0.1A (resistive load)
- Protective resistor
- Alarm LED - Red LED (Receiver) ON : when an alarm is initiated
- Attenuation LED - Red LED (Receiver) ON : when beam is attenuated
- Ambient temperature range - -31°F to+151°F(-35 to +66℃)
- Beam adjustment - Horizontal: ±90°, Vertical: ± 20°
- Functions - Modulated beam frequency selection,Tone indicator, Environmental module, Beam power selection, Transmitting power adjutment, Programmed AGC, Auto-gain lock function, Monitor Jack, Tamper, Response time adjustment, Upper/lower beam switch Wireless checker
- Mounting positions - Outdoor, Indoor
- IP rating - 65
- Wiring - Terminals
- Weight - Transmitter : 49oz (1,400g) Receiver : 52.5oz (1,500g)
- Appearance - Resin (wine red)
PXB-100ATC Specifications PDF
|
|
|