FPO75/150-E2 LifeSafety Power 6 Amp 12VDC 12 Amp 12VDC Access Control Power Supply in UL Listed Indoor 16" W x 20" H x 4.5" D Electrical Enclosure

The FLEXPOWER FPO250/250-E12 is a dual voltage offline power supplybattery charger specifically designed for the lifesafety industry. Capable of providing two pairs of outputs, each pair user selectable for 12 or 24 VDC, the unit is configured in a painted, steel, locking enclosure with tamper switch and integral battery space.

Specifications

Input Power

• Input 120/230 VAC 50/60 Hz | 225 Watts combined power (1.9A)
• Overload and short circuit protection
• Over temperature protection
• Polarized AC power supply disconnect

Output Power

• FPO75: 12V/6A or 24V/3A | 75 Watts
• FPO150: 12V/12A or 24V/6A | 150 Watts
• Outputs: Continuous (DC1) Resettable (DC2)
• 120 mV output voltage ripple
• System Efficiency: 87% | System BTU Rating: 99 BTU/Hr

Battery Charging

• Independent built-in 2A charger for sealed lead acid or gel type batteries
• Microprocessor dual rate charging of 12 or 24 V battery sets
• Automatic switchover to standby battery when AC fails
• Zero voltage drop when switched over to battery backup

Supervision

• AC Fail (form "C" contacts)
• System fail (form "C" contacts) may be triggered by low/no battery, short to earth ground and power supply failure

Visual Indicators

• AC input, DC1 and DC2 output
• System fault
• AC fault
• Short to earth ground
• Reverse battery polarity
• Fire Alarm Input activated

Regulatory Compliance

• UL294 and 1076
• Class 2
• FCC
• CSFM

Physical Dimensions

• Enclosure: 20.00H x 16.00W x 4.50D in. (51.00 x 40.00 x 11.50 cm)

FPO75/150-E2 Specifications PDF