FPO75-B100C4D8E1 LifeSafety Power 4 Door 4 Amp 12VDC and 24 VDC 4 Lock and 8 Auxiliary Distribution Outputs Access Control and CCTV Power Supply in UL Listed Indoor 12" W x 14" H x 4.5" D Electrical Enclosure

This unit is a 12V and 24V DC dual voltage access power system.

C84 lock control module provide four access control inputs capable of voltage or dry contact activation, and four outputs programmable for failsafe / failsecure operation at either 12 or 24 VDC and controlled by the integrated fire alarm interface circuit on the FPO.

D8 module provides eight auxiliary outputs and each output is configurable for 12 or 24VDC operation.

Specifications

Input Power

• Input 120/230 VAC 50/60 Hz | 166 Watts combined power (1.4A)
• Overload and short circuit protection
• Over temperature protection
• Polarized AC power supply disconnect

Output Power

• 4A@12V and 2A@24V DC, 75W maximum combined output power
• Outputs: Continuous (DC1) Resettable (DC2)
• 8 auxiliary outputs, fused at 3A each
• 4 lock control outputs, fused at 3A each
• 120 mV output voltage ripple
• System Efficiency: 83% | System BTU Rating: 33 BTU/Hr

Battery Charging

• Independent built-in 1A charger for sealed lead acid or gel type batteries
• Microprocessor dual rate charging of 12 or 24 V battery sets
• Automatic switchover to standby battery when AC fails
• Zero voltage drop when switched over to battery backup

Supervision

• AC Fail (form "C" contacts)
• System fail (form "C" contacts) may be triggered by low/no battery, short to earth ground and power supply failure

Visual Indicators

• AC input, DC1 and DC2 output
• System fault
• AC fault
• Short to earth ground
• Reverse battery polarity
• Fire Alarm Input activated
• B100: DC input / output and Fault
• D8: DC outputs
• C4: outputs and fault status

Regulatory Compliance

• UL294 and 1076
• Class 2
• FCC
• CSFM

Physical Dimensions

• Enclosure: 14.00H x 12.00W x 4.50D in. (35.00 x 31.00 x 11.50 cm)

FPO75-B100C4D8E1 Specifications PDF