TI614 Pelco Sarix 14mm 640X480 Outdoor Uncooled Thermal IP Security Camera 24VAC/12VDC

The Sarix TI Series Fixed Thermal IP Camera is an advanced thermal imaging system designed for easy integration into any new or existing video security application. The system is designed to provide detection, recognition, and identification of people and vehicles in any lighting condition, including complete darkness. Every Sarix TI Series features IP or analog outputs in the same package and an integrated environmentally protected IP66 rated enclosure. Additionally, when used in an IP system, the Sarix TI Series features a full suite of designed-for-thermal analytics.

Specifications

Video

• Video Encoding - H.264 High, Main, or Base profiles; MJPEG, and JPEG
• Video Streams - Up to 2 simultaneous streams; the second stream is variable based on the setup of the primary stream
• Frame Rate - Up to 30, 25, 24, 15, 12.5, 12, 10, 8, 7.5, 6, 5, 4, 3, 2.5, 2, 1 (dependent upon stream configuration)
• Supported Protocols - TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, IPv6†, SNMP, QoS, HTTP, HTTPS, LDAP (client), SSH, SSL, SMTP, FTP, and 802.1x (EAP)
• Users
  • Unicast - Up to 20 simultaneous users depending on resolution settings (2 guaranteed streams)
  • Multicast - Unlimited users H.264
  • Security Access - Password protected
  • Software Interface - Web browser view and setup
  • Pelco System Integration - Endura 2.0 (or later) Digital Sentry 7.3 (or later)
  • Open API - Pelco API or ONVIF v1.02
• Video Port - 75 ohms, unbalanced
• Video Modes - NTSC or PAL
• Video Level - 1 Vp-p

Electrical

• Port - RJ-45 connector for 100Base-TX, auto MDI/MDI-X
• Cabling Type - Cat5 or better for 100Base-TX
• Power Input - 24 VAC or 24 VDC
• Input Voltage Range - +15%, –20%
• Current Consumption - <750 mA nominal; <1.2 A maximum
• Local Storage - Micro SD
• Alarm Input - N.O. switch, N.C. switch, or 1 kohm; supervised
• Alarm Output - 0 to 32 VDC maximum, 100 mA maximum
• Audio - Bidirectional, half duplex; line level/external microphone input; 600 Ohm differential; 1 Vp-p maximum signal level
• Compression - G.711 PCM 64 kbps

Mechanical

• Latching - 2 captive Torx screws
• Cable Entry - 2 adjustable 0.5-inch NPT liquid-tight glands

General

• Construction - Aluminum
• Finish - Gray polyester powder coat
• Environment - Indoor/outdoor
• Operating Temperature - –40° to 50°C (–40° to 122°F)
• Storage Temperature - –40° to 60°C (–40° to 140°F)
• Weight
  • Unit
    • 6.30 mm - 3.1 kg (6.9 lb)
    • 14.25 mm - 3.1 kg (6.9 lb)
    • 35 mm - 3.2 kg (7.2 lb)
    • 50 mm - 3.3 kg (7.3 lb)
    • 100 mm - 3.4 kg (7.5 lb)
  • Shipping
    • 6.30 mm - 4 kg (9 lb)
    • 14.25 mm - 4 kg (9 lb)
    • 35 mm - 4 kg (9 lb)
    • 50 mm - 4 kg (9 lb)
    • 100 mm - 4 kg (9 lb)
  
  

  TI614 Specifications PDF