DL4500DBL-10B Alarm Lock Electronic Digital Mortise Lock - Straight Lever Deadbolt Function Left Hand - Duronodic Finish

Specifications

• Operation - Authorized digital code or prox technology ID (e.g HID card) enables outside lever to retract latchbolt, deadlocking latch and deadbolt (where applicable). Inside lever is always in passage mode and permits instant egress.
• Operating Temperature - Weatherproof lock with operating range from -31 degrees below to 151degrees F.
• Keypad - Rugged weather-resistant all-metal, 12-button programmable for multi-level access functions.
• Programming - Locking modes, event schedules, group or individual user codes, master and management codes, passage and emergency or service code, lockout and remote override capability and allowableentry time (3, 10 or 15 seconds), etc. are programmable through the keypad, from the Data Transfer Module (AL-DTMII) or using any PC running Alarm Lock DL-Windows Software.
• Audit Trail - Locks’ entry activity log can be polled to the Data Transfer Module (AL-DTMII), any PC using DL-Windows Software, and/or can be on-site printed using the hand-held infrared printer (AL-IR1).
• Power - 5AA alkaline batteries extended operations, furnished. Also optional AC auxiliary power using 6-12 volt power supply. Audible low battery alert, visual and audible entry indicators, 60.000 cycles, typical.
• Door Thickness - Standard I 3/4" (4.46cm) thickness. (Accepts I 3/8" to 1 7/8" or 3.5 to 4.7 cm).
• Backset - 2 3/4" (7.01 cm)
• Door Prep - Standard ANSI 115.1 Mortise prep. modified with added through-bolt holes.
• Cylinder - 1 3/8" (3.5cm) mortise cylinder supplied. 1 3/4" - 1’ 1/2" (3.5 - 3.82cm) mortise cylinders accepted. Classroom Models are supplied with cylinder with straight cam. Deadbolt Models are supplied with cylinder with cloverleaf cam.
• Classroom Models - Feature stainless steel latchbolt with 3/4" (1.91 cm) projection and deadlocking latch.
• Deadbolt Models - Feature stainless steel deadbolt with 1" (2.55 cm) projection, latchbolt with 3/4" (1.91 cm) projection and deadlocking latch. Deadbolt may be projected from key cylinder from outside door or tum-piece from inside door.
• Interchangeable Cores - Will accept interchangeable core mortise cylinders with compatible cams. Not Supplied.
• Trim - Standard Trilogy Handle Leverset (squared) or optional Regal curved lever handle.
• Handling - Specify Right or Left hand when ordering. If reverse handing is required, lock is field reversible. See installation instructions for directions.
• Strike - ASA strike supplied, matched to classroom or deadbolt function model & lock handing. Standard strike is 4 7/8" (12.43 cm) and includes combination wood/metal screws.
• Finishes - US26D Satin Chrome, US5 Antique Brass, DS3 Polished Brass, US26 Polished Chrome and 10B Duronodic.
• Compliances - Steelcase lockbody meets BHMA specifications for Grade 1 locks. UL Listed to the IOC Positive Pressure Specification. Latchbolt is UL Listed, and 3-hour fire rated. FCC Certified. ADA compliant lever.

DL4500DBL-10B Specifications PDF