STI-14000NC STI Universal Stopper Low Profile without Horn Housing Flush Mount No Label Hood - No Label - Clear

This indoor/outdoor low profile polycarbonate cover helps protect devices such as dual action pull stations, keypads for entry systems, intercom stations, emergency buttons, electrical light switches, duplex plugs, etc. The strong, durable construction takes the toughest knocks while it guards against accidental or intentional physical damage.
This Universal Stopper is a clear, low profile, flush mount cover. Other Universal Stoppers include a surface spacer with conduit knockouts or a waterproof Type 4X enclosed back box. The Universal Stopper is designed to comply with ADA and is less than 4 inches in depth. Universal Stopper has the same footprint as the Mini Stopper, but has a larger interior and can accommodate most dual action pull stations.

Specifications

Polycarbonate Enclosure

• Flammability - flush and surface mount models (Fig. 2 & 3): UL 94 V-2, enclosed flush and enclosed back box models (Fig. 4 & 5): UL 94 5VA
• Cover wall thickness 0.125 inches

Gaskets

• STI-1318 3” Gasket - Neoprene 1/8” diameter
• Mounting Gasket (embedded in housing at STI factory prior to shipping) - Two part polyurethane
• STI-6004 1/2” or 3/4” conduit weather gasket - Closed Cell Neoprene

Horn

• Low (95 dB @ 1 ft.)
  • 9V (Battery included) - 40mA
  • 12V - 38mA
  • 24V - 22mA
• High (105 dB @ 1 ft.)
  • 9V (Battery included) - 105mA
  • 12V - 125mA
  • 24V - 95mA
• Min. Operating Req.
  • 9V (Battery included) - 2V @ 20mA
  • 12V - 4V @ 20mA
  • 24V - 4V @ 20mA

Dry Contact Relay

• 30 VAC/VDC, 1A

Temperature Range

• Electronics operating range: -40° to 120°F (-40° to 49°C) Below -4°F (-20°C), a remote power source is recommended
• Polycarbonate rated: -40° to 284°F (-40° to 140°C).

STI-14000NC Specifications PDF

STI-14000NC Manual