[DISCONTINUED] 59900 Xantech Pulsed Switching Module

The 599-00 generates momentary (pulsed) outputs in response to an On/Off switched DC input voltage. The pulsed outputs, 100 milliseconds in duration, are triggered during the On and Off transitions of the DC input voltage. The 599-00 was developed primarily to provide momentary inputs for the Model 590-00 Programmable Controller when working with long term DC control voltages. It will work, however, in any application requiring a pulsed output from a switched DC input.

Specifications

• Input Control Voltage & Current - (atIN+ & IN—Terminals) 4 to 12 Volts DC @ 1 mA/Volt.
• Min. Input Turn-ON & OFF Voltage - 2.5 Volts DC.
• Red LED - lights with presence of voltage at the IN+ & IN—terminals (+1.4 V or more).
• Input Terminals (IN+ & IN—) - are Opto-Isolated for floated input applications.
• Pulsed Output (100 mS) Voltage & Current (at ON & OFF Terminals) - +12 Volts Peak, @ 1 mA.; + 9 Volts Peak, @ 12 mA.; + 6 Volts Peak, @ 25 mA.; + 3 Volts Peak, @ 30 mA.
• ON Terminal - Goes active High during Input On transition at the IN+& IN—terminals.
• OFF Terminal - Goes active High during Input OFF transition at the IN+& IN—terminals.
• Power Requirements - 12 VDC @ 30 mA.
• Terminals - Screw-type handle wire sizes from 24 to 14 gauge.
• Mounting - Flanges, plus supplied screws, permit easy mounting to flat surfaces.
• Dimensions - 4-1/4" x 1-7/8" x 1" (108mm x 48mm x 26mm)

59900 Installation Manual