The cart is empty.
Dealers. First. Always.
DWG

[DISCONTINUED] 79620 Xantech Zone Expander

SKU: 79620

  • Expands the 795 Zone Controller to a total of nine zones
  • Connects directly to the 795 and is powered via the 795
  • Can be used in conjunction with a 791-44 (without a 795) for a 6 zone system
  • Multiple 796's may be used with a 791-44 for even more zones (limited only by IR noise considerations)
More details...
MSRP Price: $323.00
Online Price: $314.00
DISCONTINUED
Save to my Wish List

DWG Dealer Price : ---


Dealers - click here to set up your dealer account today.

Existing DWG Customers - Log In to view your current dealer pricing.



Previous Item   Next Item
Product Details

The Model 796-20 is a Six Zone Connecting Block that allows IR control of elaborate multizone audio/video systems. It serves as an expansion module for the 795-20 or, by itself, as a six zone block. Expansion beyond 6 zones can be achieved with multiple 796's, limited only by IR noise considerations. The zone input terminals permit the connection of any Xantech IR Receiver, Keypad or controller device. Each zone output can control 2 or more pieces of equipment per zone, independent of the other zones, via single or dual emitters or be direct wired to the IR input of Xantech Preamps, etc. The common output port can drive 1 single or 1 dual emitter or the IR input of Xantech Connecting Blocks for control of common source equipment from any zone. The 796-20 utilizes active isolation devices for elimination of internal zone-to- zone cross-talk as well as high speed amplification to all output ports for operation with a wide range of IR controlled products.


Specifications


  • Zone IR Inputs: Six 3-screw terminal connectors to interface with all Xantech 3-lead IR receivers and/or keypads.
  • Outputs: 12 Zone emitter ports (3.5mm mini mono jacks) and 1 common port (screw terminals).
  • Green LED test indicators are connected in series with the zone outputs. They will only light when the connected emitter or device is conducting current.
  • Zone output ports A and B and the common port are parallel driven and have a 470-Ohm resistor in series with each port for lower power operation. This prevents overload of IR sensors on A/V components and also allows the use of models 282, 283, 284 & 286 series Mini Emitters, Xantech Controllers, Preamps, etc. in any combination.
  • Power requirements: 12 volts DC. Use 781RG or 782-00 Power Supplies.
  • Power is applied via the +12 & G of the common terminals
  • Dimensions: 13-3/8" W x 1-7/8" D x 1" H

79620 Installation Manual


Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In