POE31U-560DO Phihong Passive PoE Adapter

Specifications

Input

• AC Input Voltage Rating - 100 to 240VAC
• AC Input Voltage Range - 90 to 264VAC
• AC Input Current
  • 0.8A (RMS) maximum for 120VAC
  • 0.5A (RMS) maximum for 240VAC
• AC Input Frequency - 47 to 63Hz
• Leakage Current - 3.5mA maximum for 254VAC, 50Hz
• Max In-rush Current - 60A maximum at 240VAC and maximum load (Cold Start at ambient 25°C)

Output

• Output Power - 15W per port, 30W Total Power
• Ripple (P-P) - 250mV max
• Transient O/P Voltage Protection - 60V maximum at switch on/off at any AC line phase
• Efficiency - 80% Typical at maximum load and 120VAC, 60Hz
• Hold-up time - 10mS minimum at maximum load and 120VAC, 60Hz

Environmental

• Operating Temperature - 0 to +40°C
• Non-operating Temperature - -20 to +65°C
• Relative Humidity - 5 to 90%
• EMI
  • EN55022 Class B
  • FCC part 15 Class B
• EMC
  • ESD - IEC61000-4-2 Level 3
  • RS - IEC61000-4-3 Level 2
  • EFT/Burst - IEC61000-4-4 Level 2
  • Surge -IEC61000-4-5 Level 3
  • CS - IEC61000-4-6 Level 2
  • Voltage Dips - IEC61000-4-11
  • Harmonic - IEC61000-3-2 Class A
• Isolation (HI-POT)
  • Primary to secondary - 1500VAC for 1 minute, 10mA
• Insulation Resistance
  • Primary to Secondary - 10M Ohm 500VDC

Feature

• Short Circuit Protection - The output can be shorted permanently without damage
• Indicator
  • Green LED - Power “ON”
• AC Input Connector - IEC320 inlet 3-pin
• POE OUT Connector - RJ45
• Output Connection - Port 1 - +pins 4,5 / -pins 7,8 2: +pins 3,6 / -pins 1,2
• Warranty - 1 Year

POE31U-560DO Specifications PDF