[DISCONTINUED] DXS-32 Linear Supervised Miniature Door/Window Transmitter

The Model DXS-32 Supervised Miniature Door/Window Transmitter is a battery powered stationary transmitter designed for use with Linear’s DXS and DX format receivers. This transmitter can be used in a variety of wireless remote control applications. Triggering the transmitter with its built-in magnetic switch sends a digitally coded wireless signal to its companion receiver.
The digital DXS code format features over a million possible codes. The DXS transmitters are precoded at the factory to unique codes, so no field coding is required. The DXS-32 can send four different codes: alarm, restore, low battery and status.
In a typical installation, the magnet is mounted on a door or window and the transmitter is mounted on the frame. When the magnet moves more than 1/2" away from the transmitter, an alarm signal is sent. When the magnet returns next to the unit, a restore signal is sent. The magnet is adjustable with four height positions. A 1/4" high magnet spacer is also supplied to snap on to the base of the magnet.

Specifications

• Power - Two 3V 2032 lithium batteries (supplied)
• Battery Life - Three years (typical)
• Measured Range - 1,500 feet, open air, with DVS-2400 control panel
• Operating Frequency - 315 MHz
• Operating Temperature - 32° to 120° F (0° to 49° C)
• Dimensions - 0.9" W x 2.25" H x 0.6" D (23 x 57 x 15 mm)

DXS-32 Installation Manual