COMPAK1031M1 Comnet 10-Bit Digital Video with Bi-Directional and up-the-Coax Data Transmitter and Receiver

The ComNet FVT1031M1 and FVR1031M1 video transmitter/ receiver and data transceiver support simultaneous transmission of short-haul quality 10-bit digital video, bi-directional data and up-the-coax data over one multimode optical fiber. The module is universally compatible with major CCTV camera manufacturers and supports RS-232, RS-422 and 2 or 4-wire RS-485 data interfaces, and most major data protocols as well as up-the-coax data. The FVT/ FVR1031 allows the user to choose bi-directional data or up-the-coax data through a switch on the unit. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required. Bi-color (Red/Green) LED indicators are provided or rapidly ascertaining equipment operating status. Packaged in the exclusive ComNet ComFit housing, these units may be either wall or rack-mounted, or may be DIN-rail mounted by the addition of ComNet model DINBKT1 adaptor plate.

Specifications

Video

• Video Input - 1 volt pk-pk (75 ohms)
• Overload - >1.5V pk-pk
• Bandwidth - 5 Hz - 10 MHz
• Differential Gain - <2%
• Differential Phase - <0.7°
• Tilt - <1%
• Signal-to-Noise Ratio (SNR) - 67 dB @ Maximum Optical Loss Budget
• Max. RG-59 COAX Distance - 100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth

Data

• Data Format - RS-232, RS-422, 2 or 4-wire RS-485 w/Tri-State, Manchester, bi-phase and up-the-coax data
• Data Rate - DC-115 Kbps (NRZ)
• Wavelength - 1310/1550 nm
• Number Of Fibers - 1
• Optical Emitter - Laser Diode

Led indicators

• Video Sync Presence - Received Data
• Transmitted Data - Optical Carrier Detect

Connectors

• Optical
  • ST (Standard)
  • SC or FC (Optional)
• Power - Terminal Block
• Video - BNC (Gold Plated Center-Pin)
• Data - Terminal Block

Electrical & Mechanical

• Power
  • Surface Mount - 8-15 VDC @ 2W
  • Rack Mount - From Rack
• Number of Rack Slots - 1
• Current Protection - Automatic Resettable Solid-State Current Limiters
• Circuit Board - Meets IPC Standard
• Size (in./cm) (L×W×H) - 6.1 x 5.3 x 1.1 in., (15.5 x 13.5 x 2.8 cm)
• Shipping Weight - <2 lb./0.9 kg

Environmental

• MTBF - >100,000 hours
• Operating Temp - -40° C to +75° C
• Storage Temp - -40° C to +85° C
• Relative Humidity - 0% to 95% (non-condensing)

COMPAK1031M1 Specifications PDF