The cart is empty.
Dealers. First. Always.
DWG

COMPAK4VB Comnet Compak Transmitter Receiver Convenience Pack Product Line

SKU: COMPAK4VB
  • 8-bit digitally encoded video: transmits and receives 4 realtime color video signals on four separate optical fibers (via four transmitters and one receiver)
  • 4 independent simplex dry contact closure channels
  • Low video distortion, with zero performance variation vs. optical path loss
  • Compatible with all NTSC, PAL, or SECAM CCTV camera systems
  • Bi-color (Red/Green) LED status indicators provide rapid indication of critical operating parameters
  • Automatic resettable solid-state current limiters
  • Hot-swappable rack modules
  • Interchangeable between stand-alone or rack mount use ComFit
More details...
MSRP Price: $3,360.00
Online Price: $2,730.00
Save to my Wish List
Product Details

The ComNet FVR4C4B Video and Contact Closure Receiver unit supports four independent channels of video and four independent dry contact closures over four separate optical fibers. The FVT1C1B-M video mini-transmitter supports transmission of a fixed video and a contact closure signal using an 8-bit digitally encoded signal on one multimode or single mode fiber optic cable. State-of-the-art 8-bit digital decoding is utilized for the four video channels. The contact closure channels may be used with triggered-event CCTV camera systems, or other applications such as access controlled gates, doors, or other equipment requiring remote actuation and control. Plug-andplay design ensures ease of installation, and no electrical or optical adjustments are ever required.


Specifications


Video

  • Video - 1 volt pk-pk (75 ohms)
  • Overload - >1.5V pk-pk
  • Video Channels - 4
  • Bandwidth (minimum) - 5 Hz - 8 MHz
  • Differential Gain - <2%
  • Differential Phase - <2™
  • Tilt - <0.5%
  • Signal-to-Noise Ratio (SNR) - 60 dB @ Maximum Optical Loss Budget
  • Contact Output - 30VDC @ 500mA max., resistive-load
  • Wavelength - 1310 nm Single Mode
  • Number Of Fibers - 4

Indicating LEDs

  • Optical
  • Contact Closed
  • Video (Sync Presence for each Channel)

Connectors

  • Optical - ST
  • Power
    • Terminal Block (Receiver)
    • 2.1mm Center Positive Plug
  • Video - BNC
  • Contact - Terminal Block

Power

  • Operating Voltage Range - 8 to 15 VDC (Receiver), 5 VDC (Transmitters)
  • Rack Mount Power Supply - From Rack (Receiver only)
  • Power Consumption - 5W (Receiver), 2W (Transmitters)

Electrical & Mechanical

  • Number of Rack Slots - 1 (Receiver)
  • Current Protection - Automatic Resettable Solid-State Current Limiters
  • Circuit Board - Meets IPC Standard
  • Sizes
    • Receiver - 6.1 ™ 5.3 ™ 1.1 in (15.5 ™ 13.5 ™ 2.8 cm)
    • Transmitters - 3.3 ™ 2.5 ™ 1.1 in (8.4 ™ 6.4 ™ 2.8 cm)
  • Shipping Weight - <2 lb./0.9 kg

Environmental

  • MTBF - >100,000 hours
  • Operating Temp - -40˚ C to +75˚ C
  • Storage Temp - -40˚ C to +85˚ C
  • Relative Humidity - 0% to 95% (non-condensing)

COMPAK4VB Specifications PDF

COMPAK4VB Installation Manual


Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In