PS-AMR1-12 Comnet Industrial DIN Rail Mounting 12 or 24 Volt Power Supplies

The ComNet PS-AMR Series offer a complete range of high quality, low noise switching mode power supplies of various output sizes ideally suited to the entire ComNet industrial product range that require either 12 or 24VDC power input. These rugged units are DIN rail mountable, providing an ideal mounting configuration to a mating ComNet industrial switch or any product using our range of DIN rail mounting adapters. The wide ambient operating temperature range permits installation in most out of plant and unconditioned environments, such as those found in intelligent transportation systems or factory automation/industrial control applications. Unconditional line and load protection is provided.

Specificiations

Power Input

• Rated Input Voltage - 90 to 264 VAC or 120 to 375 VDC
• Input Current - 115 / 230 VAC 200 / 135 mA
• Line Frequency - 47 to 63 Hz
• Inrush current - 115 / 230 VAC 15 / 30 A
• Power Dissipation - 230 VAC 12: 2.3 W
• Voltage Accuracy - +1%
• Minimum Load - 0%
• Line Regulation - ±1%
• Voltage Trim Range
  • 12 V: 12 to 14 VDC
  • 24 V: 24 to 28 VDC
• Hold up time - 115 / 230 VAC 10 / 30 ms
• DC ON / LOW indicator threshold
  • 12 V: 9 to 10.8 VDC
  • 24 V: 19.2 to 21.6 VDC

General

• Isolation Resistance - Input-Output, @ 500VDC, 100 MΩ
• Derating - +61º to 71ºC, max 2.5% / ºC
• Cooling - Normal convection (Recommend all sides 25m/m free space)

Control and Protection

• Input fuse - 250 VAC internal T1A
• Internal Surge Protection - IEC 61000-4-5
• Rated Over Load Protection - 110 - 165 %
• Over voltage protection Auto Recovery
  • 12 V: 15 to 16.5 VDC
  • 24 V: 30 to 33 VDC
• Degree of protection - IP20

Connector

• AWG24-12 (0.2 - 2.5mm²) flexible / solid cable

Indicating LEDs

• DC ON - At Start Up (Green)
• DC LOW - After Start Up (Red)

Electrical & Mechanical

• Size - 3.58 × 0.71 × 2.22 in (9.1 × 1.8 × 5.65 cm)
• Weight - 0.14 lb / 65 g

Environmental

• MTBF - >500,000 hours @ 40ºC
• Operating Temp - -40˚ C to +71˚ C
• Storage Temp - -40˚ C to +85˚ C
• Relative Humidity - 20% to 90% (non-condensing)

Approvals & EMC Compliance

• UL / cUL
  • UL 508 Listed
  • UL 60950-I, UL 1310 Class 2 Power (24LS model only) recognized
  • ISA 12.12.01 (Class I, Div 2, Groups A, B, C, & D)
• TUV - EN 60950-I, CB scheme
• CE
  • EN 61000-6-3, EN 55022 Class B, EN 61000-3-2
  • EN 61000-3-3, EN 61000-6-2, EN 55024
  • EN 61000-4-2 Level 4, EN 61000-4-3 Level 3
  • EN 61000-4-4-4 Level 4, EN 61000-4-5 L-N Level 3
  • EN 61000-4-6 Level 3, EN 61000-4-8 Level 4
  • EN 61000-4-11, ENV 50204 Level 2, EN 61204-3
• Vibration
  • Meets IEC 60068-2-6
  • Rail Mount - 10 - 500 Hz, 2G, 60 min for each Axis
• Shock Meets - IEC 60068-2-27 15G, 11ms, 3 Axis, 6 Faces, 3 times for each Face

PS-AMR1-12 Specifications PDF