LD6PB-0 Pelco Smoked Bubble for Spectra Series Cameras

Specifications

CAMERA

• Sensor Type - 1/2.8-inch Type Exmor CMOS Sensor
• Optical Zoom - 20X
• Digital Zoom - 12X
• Maximum Resolution - 1920 x 1080
• Lens - f/1.6 ~ f/3.5, focal length 4.7 mm (wide) ~ 94.0 mm (tele)
• Horizontal Angle of View - 55.4° (wide) ~ 2.9° (tele), 59.5° wide - 3.3° tele
• Aspect Ratio - 16:09
• Light Sensitivity
  • Color (33 ms) - 0.20 lux
  • Color (250 ms) - 0.025 lux
  • Mono (33 ms) - 0.06 lux
  • Mono (250 ms) - 0.008 lux
• Day/Night Capabilities - Yes
• Shutter Range - 1/1 ~ 1/10,000 sec
• Signal-to-Noise Ratio - >50dB
• IR Cut Filter - Yes
• Wide Dynamic Range - 130 dB
• Iris Control - Auto iris with manual override
• Backlight Compensation - Yes
• Automatic Gain Control - Yes
• Active Noise Filtering - Yes
• Electronic Image Stabilization - No

VIDEO

• Video Encoding - H.264 High, Main, or Base profiles and MJPEG
• Video Streams - Up to 2 simultaneous streams; the second stream is variable based on the setup of the primary stream
• Frame Rate - Up to 60, 50, 30, 25, 15, 12.5, 10, 8.333, 7.5, 6, 5, 3, 2.5, 2, 1 (depending on the coding, resolution, and stream configuration)

NETWORK

• Supported Protocols - TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, IPv6*, SNMP v2c/v3, QoS, HTTP, HTTPS, SSH, SSL, SMTP, FTP, and 802.1x (EAP)
• Users
  • Unicast - Up to 20 simultaneous users depending on resolution settings (2 guaranteed streams)
  • Multicast - Unlimited users H.264
• Security Access - Password protected
• Software Interface - Web browser view and setup
• Pelco System Integration - Endura 2.0 (or later) Digital Sentry 7.3 (or later)
• Open API - Pelco API or ONVIF Profile G and Profile S
• Mobile Application - Integrated to Pelco Mobile App
• Video Motion Detection - Simple motion detection and camera sabotage
• Local Storage - 32 GB SD Card

GENERAL

• Construction - Nylon
• Stainless Steel Construction - 316 stainless steel; black, polyurethane powder coated finish
• Light Attenuation
  • Smoked - f/0.5 light loss
  • Clear - f/0.0 light loss
• Weight (approximate)
  • Unit - 2.6 kg (5.7 lb)
  • Shipping - 4.6 kg (10.2 lb)

ALARM

• Unsupervised - Detects open or closed alarm state
• Supervised - Detects open and short alarm state with external 1-kohm resistor
• Input - 3.5 VDC maximum, 3.5 mA maximum
• Relay Output - ±32 VDC maximum, 150 mA maximum

AUDIO

• Input/Output - Line level/external microphone input; 600-ohm differential, 1Vp-p maximum signal level
• Streaming - Embedded audio

OPERATING HUMIDITY

• In-Ceiling (indoor), Standard Pendant - 10 to 90% RH (noncondensing)
• Environmental In-Ceiling, Environmental Pendant, - 10 to 100% RH (condensing)
• Stainless Steel Environmental Pendant - 10 to 100% RH (condensing)

MECHANICAL

• Variable Speed - 0.1° to 80°/sec (manual pan speed)
• Preset Accuracy - ±0.1°
• Pan Movement - 360° continuous pan rotation
• Vertical Tilt - +1° to –90°
• Maximum Pan Speed - Up to 450° per second
• Maximum Tilt Speed - Up to 450° per second
• Manual Pan/Tilt Speeds
  • Pan - 0.1° to 80°/sec manual operation
  • Tilt - 0.1° to 45°/sec manual operation
• Preset Speeds
  • Pan - 450°/sec
  • Tilt - 450°/sec

ELECTRICAL

• Ports - RJ-45 connector for 100Base-TX Auto MDI/MDI-X Autonegotiate/manual setting
• Cabling Type - Cat5e or better for 100Base-TX
• Input Voltage - 18 to 32 VAC; 24 VAC nominal 22 to 27 VDC; 24 VDC nominal
• Input Power
  • 24 VAC - 24 VA nominal (without heater and blower); 81 VA nominal (with heater and blower)
  • 24 VDC - 1 VA nominal (without heater and blower); 3 VA nominal (with heater and blower)
  • PoE+ - 18 W, Environmental models (with heater off, blower on);* 15 W, Non-Environmental (with heater and blower off)
  • HPoE - 60 W, Environmental models (with heater and blower on);† 15 W, Non-environmental (with heater and blower off)

LD6PB-0 Specifications PDF