The cart is empty.
Dealers. First. Always.
DWG

CNGE4+2SMSPoE/M Comnet Six-port Intelligent Self-Managed Ethernet Switch with Light Management Functionality

SKU: CNGE4+2SMSPoE/M
  • Several features can be enabled with no programming required - RSTP (Rapid Spanning Tree Protocol), Dual Redundant SFP Mode
  • Electrical ports support Auto-Negotiation for 10Mbps, 100Mbps or 1000Mbps, full duplex or half duplex data
  • SFP Ports support 100 or 1000 Mbps full duplex data
  • SFP Ports compatible with CopperLine CL-SFP modules
  • IEEE802.3at Power over Ethernet (PoE+)
  • 30W or 60W PoE+ on Ports 1-4
  • 2 Duplex contact closures
  • Automatic MDI/MDI-X crossover
  • PoE status monitoring & automatic reboot function
More details...
MSRP Price: $2,100.00
Online Price: $1,706.50
Save to my Wish List
Product Details

The ComNet CNGE4+2SMS[POE][HO]/M is a six port intelligent switch with light management functionality. It provides four 10/100/1000Base-T(X) copper ports and two 100/1000Base-FX SFP ports.


Specifications


Data

  • Data Interface - Ethernet
  • Data Rate - 10/100/1000 Mbps, IEEE 802.3 Compliant, Full Duplex or Half Duplex Electrical Ports/Full, Duplex Optical Port
  • Electrical - CNGE4+2SMSPOE/M Ports 1-4: 30 W Max

Connectors

  • Opticalš - Requires selection of sold-separately SFP modules, See ComNet data sheet for number and description of SFP modules
  • Serial - Mini USB
  • I/O - Terminal Block
  • Power - Terminal Block
  • Data - RJ45

Network Redundancy

  • STP / RSTP

Management

  • SNMP - SNMP V1/2c
  • HTTP - Web GUI Configuration Interface
  • CLI - Serial Command Line Interface

Switch Properties

  • Switching Latency - 7μs
  • Switching Bandwidth - 12 Gbps
  • MAC Table - 1K
  • Processing - Store-and-Forward

Contacts (PoE Models Only)

  • Response Time - 25ms typical (network dependent)
  • Input/Output Channels - 2
  • Inputs - 2 × Dry Closure
  • Outputs - 2 × Form A contacts (Rated 1A @ 24 VDC, nonresistive loads)

Power

  • Operating Voltage - Dual 48 to 56 VDC PoE, 9 to 36 VDC or 24 VAC non PoE
  • Current Draw - 246 W max with PoE, 6W max w/out PoE
  • Current Protection - Automatic Resettable Solid-State Current Limiters

PoE Pin Assignment

  • RJ45 port supports IEEE802.3at
  • End-point Positive (VCC+): RJ45 pin 1, 2 (RJ45 pin 1,2 and 4,5 on 60W ports)
  • Negative (VCC-): RJ45 pin 3, 6 (RJ45 pin 3,6 and 7,8 on 60W ports)

Electrical & Mechanical

  • Indicating LEDs - Optical Link/Data Activity, Electrical Link/Data Activity, Power PoE Status
  • Circuit Board - Meets IPC Standard
  • Size - 4.1 × 3.7 × 2.2 in (10.4 × 9.4 × 5.6 cm)
  • Surface Mount - Wall or Flat Surface Screw Attachment
  • Shipping Weight - <2 lb / 0.9 kg

Environmental

  • MTBF - >100,000 hours
  • Operating Temp - -40˚ C to +75˚ C
  • Storage Temp - -40˚ C to +85˚ C
  • Relative Humidity - 0% to 95% (non-condensing)˛

Software Features

  • STP/RSTP (IEEE 802.1D/w)
  • Port Configuration, Status, Statistics
  • PoE Configuration, Status, Health Check
  • SNMP
  • Enable/Disable Ports
  • IGMP v2 Snooping

Ethernet Standards

  • IEEE 802.3 for 10BASE-T
  • IEEE 802.3u for 100BASE-TX and 100BASE-FX
  • IEEE 802.3z for 1000BASE-X
  • IEEE 802.3ab for 1000BASE-T
  • IEEE 802.1D for STP (Spanning Tree Protocol)
  • IEEE 802.1w for RSTP (Rapid Spanning Tree Protocol)
  • IEEE 802.1AB for LLDP (Link Layer Discovery Protocol)
  • IEEE 802.3at for Power Sourcing Equipment (PSE) and PoE (≤ 30 W per port)
  • IEEE 802.3x Flow Control and Back Pressure

CNGE4+2SMSPoE/M Specifications PDF


Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In