MAXFIT7512APSD Altronix 20Amp 12/24VDC Access Control Power Supply ACMS12 & PDS16

Altronix ACMS12/ACMS12CB are sub-assemblies designed to be used in Altronix wall and rack mount enclosures. Dual input design allows power to be steered from two (2) independent low voltage 5 to 24VDC power sources into twelve (12) independently controlled fuse or PTC protected outputs. Outputs are activated by an open collector sink, normally open (NO), normally closed (NC) dry trigger input, or wet output from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc.

Altronix PDS16 dual input power distribution module is designed to steer the power from either two (2) low voltage AC or DC power sources. The two Inputs can be either, both DC (e.g. 12VDC and 24VDC) or both AC (e.g. 16VAC and 24VAC). That power is distributed over a total of sixteen (16) fuse-protected outputs. The spade connectors allow you to daisy chain multiple PDS16 modules. This feature allows you to distribute the power over more outputs for larger systems.

Specifications

Input

Two (2) independent low voltage inputs

• Input1 - 12 or 24VDC Altronix Power supply
• Input 2 - 12 or 24VDC Altronix power supply or either 5 or 12 VDC from VR6 Regulator

Voltage Range

• Main Fuse Rating - 20A total input 15/32A
• Current Consumption - 0.6A @ 12V, 0.3A @ 24V with all relays energized
• Trigger Inputs
  • Twelve (12) individually controlled trigger inputs:
  • a) Normally open (NO) inputs
  • b) Normally closed (NC) inputs
  • c) Open collector sink inputs
  • d) Wet Input (5VDC - 24VDC) with 10K resistor
  • e) Any combination of the above

Outputs

• ACMS12 - Fuse protected outputs rated @ 2.5A per output, non power-limited. Total output 20A max

Output Ratings

• ACMS12 - Fuses are rated 3A/32V each

Fire Alarm Disconnect

• Supervised - Latching or non-latching, individually selectable for any or all of the twelve (12) outputs
• EOL - 10K Resistor

Indicators (LED)

• Blue LED - FACP disconnect is triggered
• Individual Voltage LEDs
  • Green - 12VDC
  • Red - 24VDC

Physical and Environmental

• Dimensions (W x L x H)
  • Board - 7.3” x 4.1” x 1.25” (185.4mm x 104.1mm x 31.8mm)
  • Shipping - 10” x 8” x 4” (254mm x 203.2mm x 101.68mm)
• Product Weight - 0.7 lb. (0.32 kg)
• Shipping Weight - 0.95 lb. (0.43 kg)
• Operating Temperature - 0ºC to 49ºC (32ºF to 120ºF)
• Storage Temperature - – 20ºC to 70ºC (– 4ºF to 158ºF)
• Relative Humidity - 93% +/– 5%
• BTU/Hr. (approx.) - 4 BTU/Hr

PDS16 Specifications

Input

Voltage Range

• PDS16 - 5VDC to 24VDC, up to 10A each or 16VAC to 28VAC, 60Hz, up to 10A each, 20A total input
• Main Fuse Rating - 15/32A
• Main PTC Rating - 9A

Outputs

• PDS16 - Fuse protected outputs rated @ 3A per output, non power-limited Total output 20A max
• Do not exceed the individual power supply ratings
• Any of the sixteen (16) fuse/PTC protected power outputs are selectable to follow power Input 1 or Input 2
• Individual outputs may be set to OFF position for servicing

Output Ratings

• PDS16 - Fuses are rated 3A/32V each
• Total output current is determined by the power supply(ies), not to exceed a maximum of 10A for each input

Indicators (LED)

• DC Output - Individual voltage LEDs indicate 12VDC (Green) or 24VDC (Red and Green)

Physical and Environmental

• Dimensions (L x W x H) - 5.4” x 3.345” x 1” (137.2mm x 85.0mm x 25.4mm)
• Product Weight - 0.4 lb. (0.18 kg)
• Shipping Weight - 0.5 lb. (0.23 kg)
• Operating Temperature - 0ºC to 49ºC (32ºF to 120ºF)
• Storage Temperature - -20ºC to 70ºC (-4ºF to 158ºF)
• Relative Humidity - 85% +/- 5%

ACMS12 Specifications PDF

PDS16 Specifications PDF