T3MB777K1 Altronix 24-Door Altronix/Mercury Access and Power Integration Wired Kit - Trove3MBK3 with (3) eFlow104NB, (3) ACMS8, (3) PDS8, RSB1, RSB2

Altronix T3MB777K1 is a 24-door access and power integration kit which includes Altronix power and sub-assemblies along with factory installed wire management and wire assemblies that are pre-configured with terminal blocks for Mercury* hardware. This unit provides ample power and dual voltage outputs to support Mercury platform controllers and locking devices. The T3MB777K1 accommodates one (1) Intelligent Dual Reader Controller and eleven (11) Dual Reader Interface Modules. Trove Plus simplifies field installations and provides reliable, robust critical power and control for the most demanding applications.

Specifications

Three (3) Power Supplies (eFlow104NB)

Input

• Voltage - 120VAC, 60Hz, 13.5A max
• Input Fuse - 6.3A/250V

Output

• Voltage - 24VDC @ 10A
• Auxiliary - 1A (unswitched)
• Protection - Overvoltage protection. Filtered and regulated

Battery Backup

• Type - Sealed lead acid or gel type
• Fuse Rating - 15A/32V
• Failover - Upon AC loss, instantaneous

Fire Alarm Disconnect

• Supervised - Latching or non-latching
• EOL - 10K Resistor

Supervision

• AC Failure - Form “C” contacts
• Battery - Form “C” contacts
• Low DC Power Shutdown - Shuts down DC output terminals if battery voltage drops below 70-75% for 24V units (depending on the power supply) Prevents deep battery discharge

Indicators (LED)

• AC Input - 120VAC is present
• DC Output - 24VDC is present
• Battery - Discharged or not connected

Three (3) Dual Input Access Power Controllers (ACMS8)

Input

• Voltage - 24VDC from eFlow104NB
• Input Fuse - 15A/32V

Outputs

• Voltage - 24VDC
• Eight (8) independently controlled fused outputs:
  • a) Fail-Safe and/or Fail-Secure power outputs. Form “C” Relays rated 28VAC or VDC @ 2.5A
  • b) Auxiliary power outputs (unswitched)
  • c) Any combination of the above
• Output Fuses - 3.5A/32V

Indicators (LED)

• Red LEDs - Outputs are triggered (relays energized)
• Green LED - FACP disconnect is triggered

Three (3) Dual Input Power Distribution Modules (PDS8)

Input

• Voltage - 24VDC from eFlow104NB
• Input Fuses - 10A/32V

Outputs

• Voltage - 24VDC
• Any of the eight (8) power outputs are selectable to follow power Input 1 or Input 2, Individual outputs may be set to OFF position for servicing

Outputs Ratings

• Fuses - 3A/32V

Indicators LED

• DC Output - Eight (8) individual output LEDs
• Green - 12VDC
• Red - 24VDC

T3MB777K1 Kit

Agency Listings

• All components of this Trove kit are UL Listed sub-assemblies
• Please refer to the corresponding Sub-Assembly Installation Guides for further information
• CE - European Conformity

Physical and Environmental

• Dimensions (H x W x D) - 36.12” x 30.125” x 7.06” (917.5mm x 768.1mm x 179.3mm)
• Product Weight - 85.6 lb. (42.27 kg)
• Shipping Weight - 106.4 lb. (48.26 kg)
• Operating Temperature - 0ºC to 49ºC (32ºF to 120ºF)
• Storage Temperature - – 20ºC to 70ºC (– 4ºF to 158ºF)
• Relative Humidity - 85% +/– 5%
• BTU/Hr (approx.) - 433 BTU/Hr

T3MB777K1 Specifications PDF