[DISCONTINUED]AD2096A American Dynamics Matrix Alarm Interface Unit - 64 Alarm Inputs 120VAC

The AD2096 Series Alarm Interface Unit converts sixty-four hardwire alarm inputs to AD alarm contact numbers for use by American Dynamics Matrix Switcher/Controller systems. The matrix switcher/controller systems can be programmed to automatically switch video inputs to video outputs, display presets, and activate auxiliary outputs in response to activated alarm inputs. A single Form C relay and LED indicate when any of the sixty-four alarm contacts are activated. DIP switches are used to select alarm input groups (in blocks of sixty-four), to set acceptance of normally-open or normally-closed alarms (in groups of eight), and to set the baud rate of the RS-232 link. Multiple units can be cascaded on a single RS-232 system port. The universal mount enables the unit to be mounted to the front or rear of equipment racks, or flat on a wall or horizontal surface.

Specifications

Operational (Alarm Interface Unit)

• Alarm Inputs - 64 contact closures (closures to round or 0 V to 5 V logic levels), N/O or N/C, Programmable in blocks of 8
• Address Range - 16 blocks of 64 for maximum of 1024
• Alarm Outputs - RS-232 RJ-45 direct connection to system CPU
• Alarm Indication - LED, and Form-C relay outputs
• LEDs - Power and alarm

Operational (Alarm Interface Unit)

• Alarm Outputs - 32 Form-A relays, 2 groups of 16 outputs
• Address Range - Blocks of 16
• LEDs - Power and data
• Matrix Switcher - AD High Speed Data Line or Manchester code connection

Connectors (Alarm Interface Unit)

• RS-232 - RJ-45 in/out, cascadable
• Alarm Inputs - Eleven 12-pin removable screw terminals

Connectors (Alarm Responder)

• AD High Speed Data Line - BNC, in/out
• AD Manchester Code - One 12-pin removable screw terminal
• Alarm Output - Eight 12-pin removable screw terminals

Electrical

• Supply Voltage - 230 VAC, 50/60 Hz
• Power - 8 watts nominal

Mechanical

• Mounting - Universal wall, surface, and rack mount (19-inch EIA)
• Dimensions (H x W x D) - 89 x 483 x 203 mm (3.5 x 19 x 8 in)
• Unit Weight - 4.5 kg (10 lbs)
• Shipping Weight - 4.5 kg (10 lbs)

Environmental

• Operating Temperature - 0 ° to 40°C (32° to 104°F)
• Storage Temperature - 40° to 70°C (-40° to 155°F)
• Humidity - 98% RH (non-condensing)

Regulatory

• Immunity - EN50130-4
• Safety - UL2044

AD2096A Specifications PDF