FD2-IRV10-6 Pelco 2.8-10.5mm Varifocal 650TVL Indoor IR Dome Analog Security Camera 18-32VAC/12VDC

The FD2 Series is Pelco’s general purpose indoor fixed dome camera. It is designed to provide superior picture quality over a wide range of conditions. The camera’s attractive size, combined with its numerousfeatures, makes it the ideal camera for most indoor applications.

Specifications

• Image Sensor - Sony 1/3-Inch EXview HAD CCD II
• Signal Processing - Sony DSP, Effio-E
• Effective Pixels
  • NTSC - 976 (H) x 494 (V)
  • PAL - 976 (H) x 582 (V)
• Scanning Area
  • Scanning System - 5.58 (H) mm x 4.67 (V) mm, (0.22 x 0.18 inch)
  • NTSC - 525 lines, 2:1 interlace
  • PAL - 625 lines, 2:1 interlace
• Scanning Frequency
  • NTSC - Horizontal, 15.734 kHz, Vertical, 59.94 Hz
  • PAL - Horizontal, 15.625 kHz,Vertical, 50.00 Hz
• Synchronization - Internal
• Horizontal Resolution - 650 TVL
• Minimum Illumination - f/1.2; 2,850°K; 30 IRE Color 0.1 lux Mono (with IR) 0.0 lux
• IR Cut Filter - Yes, D/N switch
• Dynamic Range - Gamma selectable (ATR)
• IR Illumination Distance - 25 m
• IR Sensitivity - >40% at 850 nm, peak response
• Low Light Technology - ICR and LEDs, digital day/night
• Electronic Shutter Range - Auto/Manual 1/60 ~ 1/10,000 sec, Auto/Manual 1/50 ~ 1/10,000 sec
• Video Output - 1.0 Vp-p, NTSC/PAL composite, 75 ohms,BNC connector
• White Balance - ATW/Manual/Push/Push, Lock/User1/User2/Anti CR
• Signal-to-Noise Ratio - 48 dB (>52 dB by parameter adjustment)
• Lens - Varifocal
• F-Number - f/1.2
• Focal Length - 2.8 to 10.5 mm
• Focus Range - ∞ to 0.3 m (1 ft)
• Horizontal Angle of View - 101.8° at 2.8 mm wide zoom; 27.4° at 10.5 mm telephoto zoom
• Vertical Angle of View - 73.7° at 2.8 mm wide zoom; 20.6° at 10.5 mm telephoto zoom
• Adjusting Angle
  ,li>Panning Range - ±180°
  • Tilting Range - +60° to 0°
  • Rotation Range - ±180°
• Noise Reduction - 2D
• Motion Detection - Included (4 areas)
• Privacy Zones - Included (8 areas)
• Image Stabilization - Included
• Camera Titles - Included
• Alarm Out - 1

General

• Back Box Construction - ABS plastic
• Bubble Type - Lightly obscured
• Weight
  • Unit - 0.30 kg (0.66 lb)
  • Shipping - 0.60 kg (1.32 lb)
• Power Requirement*
  • NTSC - 18 to 32 VAC 60 Hz/12 VDC +10% to –15%
  • PAL - 18 to 32 VAC 50 Hz/12 VDC +10% to –15%
• Power Consumption
  • FD2-F, FD2-V, FD2-DV - 2.5 W
  • FD2-IRV - 4 W
  • FD2-DWV - 4.5 W
• Power Connector - 2-pin terminal block with screw terminals
• Video Connector - BNC
• Alarm Output - 2-pin terminal block with screw terminals (available on some models)

Environmental

• Operating Temperature - –10° to 50°C (14° to 122°F)
• Storage Temperature - –20° to 60°C (–40° to 140°F)
• Operating Humidity - 20% to 80%, noncondensing
• Storage Humidity - 20% to 90%, noncondensing

FD2-IRV10-6 Specifications PDF