[DISCONTINUED] EXHC200 Videotec Explosion Proof Housing w/ Heater 230VAC

The EXH Housings are made with strong Anticorodal aluminum die-cast alloy of AISi Mg EN AB-4200 group.  Depending on the model, all external components are stove enameled using powder or with special coatings offering an excellent resistance to UV rays, salt-spray, environment polluting substances.

The cylindrical body of EXHC housing (diameter 210mm and length 400mm) is closed on the opposite sides by two 12mm thick flanges.  The housing is supplied with two holes for the 3/4" NPT cable glands.  The camera housing is equipped with heater and optional sunshield.

• Solid anticorodal aluminium construction
• Epoxypolyester powder painting, RAL7032
• IP66
• 2 holes for cable glands 3/4" NPT
  
• Version with device for the protection of the glass installed on the front of the housing (EXHD)
• Version available with reinforced heater 24Vac and special painting RAL7001 for temperature application down to -40°C (-40°F) (mod.EXHC003R)
• Supplied with heater. Sunshield as option.
• Internal usable area (WxHxL): 100x100x280mm (3.9x3.9x11in)

Specifications

General

• Non-corrosive die-cast aluminum (anticorodal)
• Bicomponent polyurethane enamel with orange peel effect, RAL7032
• Special painting for low temperature, blue colour RAL7001 (EXHC003R, EXWBJ00R, EXBJ00R).  Resistant to stress cracking, adverse weather conditions, detergents, salt-spray and typical airborne pollutants.

Mechanical

• 2 inputs 3/4” NPT for cables
  
• External dimensions
  
• EXHC Ø 210mmx427.5mm (8.2x16.8in)
  
• EXHD Ø 250x573.5mm (9.8x22.6in)
  
• Internal dimensions
  
• EXHC Ø 180x380mm (7x14.9in)
  
• EXHD Ø 180x460mm (7x18.1in)
  
• Internal usable area
  
• EXHC 100x100x280mm (3.9x3.9x11in)
  
• EXHD 100x100x280mm (3.9x3.9x11in)
  
• Glass window
  
• EXHC Ø 114mm (4.5in)
  
• EXHD 70x56mm (2.7x2.2in)
  
• Glass protection device
  
• Glass protection device Ø 250x140mm (9,8x5,5in)
  
• Mylar film 80mm (3.1in) wide and 18m (59ft) length, 350 shifting steps, marks printed on the last 50cm (19in)

Electrical

• Heater Ton 10°C±4°C (50°F±7°F) Toff 25°C±3°C (77°F±5°F)
  
• IN 24Vac, consumption 20W max
  
• IN 230Vac, consumption 20W max (only for EXHC200)
  
• Reinforced heater Ton 10°C±4°C (50°F±7°F) Toff 25°C±3°C (77°F±5°F)
  
• IN 24Vac, consumption 20W max
  
• 3 resistors in the housing, consumption 60W max
  
• Glass protection device - 24Vac/Vdc, consumption 2W max
  
• Devices to install inside the housing
  
• Camera equipped with lens with max total power of 20W
  
• Power supply max 24Vac or 230Vac

Environment

• Indoor / Outdoor
  
• Operating temperature with heater: -20°C / +50°C (-4°F / +122°F)
  
• Operating temperature with reinforced heater: -40°C/+50°C (-40°F/+122°F)
  
• Always refer to the temperature in the marking.

Certifications

• ATEX (EN 60079-0: 2010, EN 60079-1: 2008, EN 60079-31: 2010)
  
• b II 2G Ex d IIC T6 Gb
  
• b II 2D Ex t IIIC T85 °C Db IP66
  
• c 0044: notify number from competent body
  
• IECEx (IEC 60079-0: 2007, IEC 60079-1: 2007, IEC 60079-31: 2008)
  
• Ex d IIC T6 Gb
  
• Ex t IIIC T85 °C Db IP66
• GOST-R 1 Ex d IIC T6 и DIP A21 TA T6
• CNEX Ex d IIC T6 DIP A21 TA T6
  
  

EXHC200 Specifications PDF