NV-EC1701-K3H NVT 3 - Camera EoC Transmission System
|
|
|
|
|
SKU: NV-EC1701-K3H
- Kit includes: 4 NV-EC1701 Transceivers; 1 NV-PS56-90W Power Supply with IEC line cord; 1 NV-EC4BNC 1:4 BNC splitter adaptor; 4 NV-PC4PR patch-cord
- 100 BaseT transmission; Network speeds up to 93 Mbps; Up to 8,000ft (2,500m)
- One NV-EC1701 transceiver at the network-end can support multiple remote transceivers/IP cameras using the NV-EC4BNC adaptor/splitter.
- 56 VDC is distributed over the coax to all connected equipment.
- Powers PoE, PoE+, or High Power PoE cameras (or other PoE devices), up to 50 watts
- Easy configuration, no PC required.
- Transparently supports all networking protocols (UDP, TCP/IP, HTTP, Multicast, etc.)
- 128-bit AES encrypted transmission
More details... |
DWG Dealer Price : ---
Dealers - click here to set up your dealer account today.
Existing DWG Customers - Log In to view your current dealer pricing.
|
|
|
NV-EC1701-K3H NVT 3 - Camera EoC Transmission System
|
|
|
|
| |
|
Product Details
|
|
The NVT Model NV-EC1701 Ethernet over Coax Transceiver is a compact media converter that allows 10/100 BaseT Ethernet and PoE+ power to be transmitted using coax cable. These devices are often used in legacy installations where existing cable is re-deployed as part of an upgrade to IP cameras. 56 VDC class 2 power is delivered to one transceiver, which distributes it to multiple remote transmitters, and their PoE, PoE+, or High Power PoE cameras.
These transceivers are extremely simple to use, with no IP or MAC addressing required. Status LEDs indicate power and link connectivity/activity for RJ45 and BNC ports They are backed by NVT’s award winning customer support and limited lifetime warranty.
Specifications
RJ45 Ethernet Interface - Connectivity - RJ45, auto-crossover Wire type - Cat5 or better
- Wire type - Cat5 or better
- Distance - up to 328ft (100m)
- Speed - 10/100 Base T, half/full duplex, auto-negotiation auto MDI/MDIX cross-over
- Latency - 3mS
- Data throughput - 85Mbps ±10% useable bandwidth per network Example - Four megapixel cameras, all sharing one coax network, each sending 20Mbps video stream(s).
- Power Output - This Power Sourcing Equipment (PSE) supports Powered Devices (PDs) that are compatible with IEEE 802.3af/at, or PDs that draw up to 50 watts. For maximum power/distance, 56 VDC appears on all eight RJ45 pins, and are current-protected and transient-protected.
Coax Building Wiring Interface - Connectivity - BNC, RG-59/U or similar
- Impedance - 25 to 100Ω
- Distance - See pages 5 & 6
- Topology - Bus architecture supports star, daisy-chain, or any combination. One control-room NV-EC1701 may support multiple remote NV-EC1701s.
- Transmission technology - IEEE 1901, 128-bit AES encryption
Led Status Indicators - Power - Blue “Power On”
- BNC Interface - Green “Link”
- RJ45 Interface - Green “Link”
Power Consumption - Consumption per transceiver - ≤ 3.0 W @ 10 to 56 VDC
- Total system consumption - = total consumption of transceivers + total consumption of PDs (IP cameras) + total power dissipated in the wire
- Generated heat - 10 BTU/hour
Mechanical - Transceiver body dimensions (excluding connectors)
- 4.10 in (102mm) long
- 1.57 in (40mm) high
- 1.65 in (42mm) wide
- Transceiver weight - 0.32lb. (145g)
- Operating and storage temperature
- 40°F to 185°F (-40°C to +85°C)
- 20 to 85% RH non-condensing
- Transient Immunity - 5x20μS 3000A, 6000V ESD 20KV, 200pF
Power Supply - Power supplies are external inline, with an IEC380- C14 power inlet and a 6 ft (1.18 m) line cord. Input voltage is 100~240VAC 50/60Hz.
- Operating / storage temperature
- -40°F to +185°F (-40°C to +85°C
- 20 to 5% relative humidity non-condensing)
- Transient immunity - 5 x 20μS 3,000A, 6,000V ESD 20KV, 200pF
 NV-EC1701-K3H Specifications PDF NV-EC1701-K3H Installation Manual
|
|
|
|
