HPV42K2A700 Videotec VERSO housing for PoE cameras with Intelligent Power Management w/ Sunshield and Heater

The VERSO Hi-PoE IPM housing exploits in an optimal way the POE and HI-POE technology, using the power supplied  by the Ethernet cable as the sole source of power for all the devices connected, thus ensuring the maximum efficiency and flexibility of the network system as well as user-friendly installation and low costs.The innovative IPM (Intelligent Power Management) system enables extremely quick and easy installation with the use of a single Ethernet connecting cable.  The Hi-POE IPM system automatically detects all the options, like heating, fan and illuminator and the autonomously balances the power to ensure suitable distribution of the same to the connected devices.  This guarantees the optimal operation of the IP camera between -30°C and +60° C, with heat regulation and cold start (activation at low temperature).

The analog system, with previously installed camera housings, can be retrofitted on IPM system simply by changing the slide and the internal electronics.  This enables the digital conversion, speeding up the installation and thereby minimizing costs and environmental impact.  Very easy to install thanks to the side opening system that allows the full access to the camera, lenses and all internal connections.

General

• Entirely made of technopolymer (polycarbonate)
• Sunshield in ABS
• RAL9002 Colour
• Epoxpolyester powder painting, RAL9002 Colour
• Stainless Steel external screws

Electrical

• Power absorbed in input: PoE class 3 (13W) or Hi-PoE class 4 (25W) selectable with dip switch
• Available power for camera (PoE IN class 3): PoE class 3 (13W) with Ton - 10°C±2°C "cold start" function
• Data line: 10/100Base-T
• Illuminator GEKO IRH, low power: 6W
• Heater: 8W, electronically controlled TON 20°C°2°C (68°C°4°C), Toff 23°C°2°C (73°F°4°C))
• Fan with thermostat for camera cooling for versions with doible air filter: TON 35°C°2°C (95°C°4°C), Toff 32°C°2°C (89.6°F°4°C))
• Demisting with forced hot air: 5W
• Compatible with IEEE 802.3af, IEEE 802.3at/Poe Plus
• Compatible with the Power injector (OHEPOWINJ: VIDEOTEC optional accessory)

HPV42K2A700 Specifications PDF