LE-046 Louroe Electronics Interfaces with CCTV Monitor-DISCONTINUED

ASK-4 Kit #200 is a single zone audio monitoring system designed for direct connection to a CCTV Monitor with built-in amplifier and speaker. Model MA-1 Interface Adapter receives the wiring from the Verifact A Microphone, supplies power and drives the audio signals into the “Audio In” port of the CCTV Monitor. The MA-1 also has RCA input/output jacks for recording and playback from a DVR/VCR. Both live audio and playback audio are channeled through the CCTV monitor’s speaker. Distance between the Verifact microphone and MA-1 Interface Adapter may be up to 1,000 ft. using recommended wiring.

The Verifact A Microphone in ASK-4 Kit #200 is an electret condenser type with pre-amp, omni-directional pattern and produces line level output. It can pick up normal sounds approximately 15’ away all directions or within a 30’ diameter circle. It is normally surface mounted to a ceiling but may also be installed to a wall or a flat surface.

Specifications (Microphone - Model A)

• Type - Electret Condenser
• Output - Line Level(0 dB @ 1000Ω)
• Output impedance (mic only) - 600Ω unbalanced
• Frequency response - 40 Hz to 15 kHz ± 1 dB
• Current drain - 4 mA
• Supply voltage - 12Vdc, 500mA
• Dimensions - 4"Dia x 1 ½"H
• Weight (shipping) - 3.0 Lbs (1.4 Kg)

Specifications (Model MA-1)

• Output impedance - 10KΩ unbalanced
• Gain - +20 dB
• Supply voltage - 12Vdc, 500mA
• Dimensions - 6 1/8"L x4 5/8"W x 1 7/8”H

LE-046 Specifications PDF

LE-046 Installation Manual