MAXIMAL11FD Altronix Access Power Controller Two 2 eFlow4NB 16 PTC Outputs

MaximalFD Access Power/Controllers distribute and switch power to access control systems and accessories. They convert a 120VAC, 60Hz input into sixteen (16) independently controlled 12VDC or 24VDC PTC protected outputs. Outputs are activated by an open collector sink or normally open (NO) dry trigger input from an Access Control System, Card Reader, Keypad, Push Button, PIR, etc.

Specifications

Input

• Voltage - 120VAC, 60Hz
• Input Fuse - Varies, see Reference Chart.

Outputs

• Class 2 Rated power-limited PTC Protected Outputs (auto-resettable).
• Voltage - 12VDC or 24VDC, see Reference Chart.
• Current - Varies, See Reference Chart.
• Protection - PTC 2.5A.
• Auxiliary - 3.5A (unswitched).
• Other - Overvoltage protection. Filtered and regulated outputs.

Back-up Battery (not included)

• Capacity - 12AH / 12VDC (up to 4 within enclosure). 40 AH / 65 AH (requires separate enclosure).
• Type - Sealed lead acid or gel type.
• Fuse Rating - Varies, see Reference Chart.
• Failover - Upon AC loss, instantaneous.

Fire Alarm Disconnect

• Supervised - Latching or non-latching, individually selectable for any or all of the sixteen (16) outputs.
• EOL - 10K Resistor.

Supervision

• AC Failure - Form “C” contacts.
• Battery - Form “C” contacts.
• Low DC Power Shutdown - Shuts down DC output terminals if battery voltage drops below 71-73% for 12V units and 70-75% for 24V units (depending on the power supply). Prevents deep battery discharge.

Indicators (LED)

• Input - 120VAC is present.
• DC Output - Powered
• Battery - Discharged or not connected.
• Relays - Individual LEDs indicate outputs are triggered (relays energized).
• FACP - Indicates FACP disconnect is triggered.

Agency Listings

• UL - UL294 - Access Control System Units
• cUL - ULC-S319-05 Electronic Access Control Systems Class I equipment, CSA C22.2 No.205 Signal Equipment.
• CSFM - California State Fire Marshall Approved.
• CE - European Conformity.

Physical and Environmental

• Dimensions (H x W x D) - 26” x 19” x 6.25” (660.4mm x 482.6mm x 158.75mm).
• Product Weight - 32.4 lb. (14.7 kg)
• Shipping Weight - 39.4 lb. (17.9 kg)
• Operating Temperature - 0ºC to 49ºC (32ºF to 120ºF).
• Storage Temperature - -20ºC to 70ºC (-4ºF to 158ºF).
• Relative Humidity - 85% +/- 5%.
• BTU/Hr. (approx.) - 12VDC - 41, 24VDC - 88, 12VDC and 24VDC - 65

MAXIMAL11FD Specifications PDF

MAXIMAL11FD Manual