ADSDU8ERHVC American Dynamics Dome Housing Recessed Ceiling Mount Indoor/Outdoor SDU I/O Board Vandal Clear Bubble

The SpeedDome Ultra 8E outdoor housing allows SpeedDome Ultra 8E programmable dome cameras to be installed in virtually any environment. The housing has been designed to provide maximum protection to the internal camera in various weather conditions. In extreme temperatures, the housing’s built-in thermostatically controlled heater and blower prevent excessive ice from forming on the outside bubble. In addition, you can manually activate a defog and defrost mode and even view the housing temperature and humidity. The housing is constructed with a reinforced fiberglass high impact polycarbonate material along with a UV stabilized sun shade, trim ring and top cover. The bubble assembly is affixed to the top via tamper-proof screws.
For applications where vandalism is a concern, a vandal resistant model is available which includes an aluminum sunshield cover and a high impact bubble which meets ANSI-87.1 impact safety standards. For additional protection a stainless steel bubble cage is also provided.

Specifications

Electrical (Combined Dome and Housing)

• Voltage - 24 to 30 VAC, 50/60 Hz
• Power - 80 W maximum
• Power-on In-rush Current - 3 A
• Video Surge Protection - Series Resistor of 3.9 ohms; Low Capacitance TVS with Peak Power Rating of 300 W at 8/20 μs; 5 kA (8/20 μs impulse discharge) Gas Discharge tube
• Manchester/SensorNet - Isolation transformer 2000 Vrms; PTC resettable fuse; Low Capacitance TVS rated at 5.6 VDC, 40 A, 0.1 J, (8/20 μs impulse discharge current); Gas Discharge tube rated at 5 kA (8/20 μs impulse discharge current)
• RS-422 - Series resistors of 3.9 ohms; Low Capacitance TVS rated at 5.6 VDC, 40 A, 0.1 J, (8/20 μs impulse discharge current); Gas discharge tube impulse rated at 5 kA (8/20 μs impulse discharge current)
• Alarm Input Surge Protection - Low Capacitance TVS with Peak Pulse Current of 17 A max and Peak Pulse Power of 300 W (8/20 μs impulse discharge current)
• Power Line - Gas discharge tube impulse rated at 5 kA (8/20 μs impulse discharge current); TVS rated at 60 VDC, 250 A, 1.5 J
• Auxiliary Output - One Relay 2FC Contact Arrangement with initial isolation resistance of 1,000 Mohms @ 500 VDC. The relay contact ration is 30 VDC, 1 A, or 125 VAC , 0.3 A

Mechanical

• Construction Enclosure - Aluminum
• Sun Shade and Trim Ring - UV stabilized, polycarbonate
• Color - Light gray
• Height - 321 mm (12.64 in)
• Diameter - 244 mm (9.61 in)
• Bubble Diameter - 75.3 mm (6.93 in) High Impact Acrylic
• Mechanical Connection - 1.5 in NPT

Connectors (on Integrated I/O Board)

• Video Output - Female BNC video cable
• Manchester/SensorNet/ - Plug in dual row header with ejector
• RS-422 - Alarm Inputs/Auxiliary Output. Plug in dual row header with ejector Unshielded Twisted
• Pair Video - Plug in dual row header with ejector
• Power
  • Plug in 3.5mm vertical header
  • Normally Closed (NC) - pin 1
  • Common (C) - pin 2
  • Normally Open (NO) - pin 3
• I/O Connector - Spring contact gold fingers for mate with SpeedDome Ultra housing/eyeball assemblies

Environmental

• Weatherproof Standard - NEMA 4/IP66
• Operating Temperature - -40°C to 50°C (-40°F to 122°F)
• Humidity - 0 to 95% RH (non-condensing)
• Storage Temperature - -40°C to 50°C (40°F to 122°F)
• Wind Loading - Sustained winds of 240 km/hour (150 miles/hour) when properly installed and mounted (wall, pole, ceiling, and overthe-roof mount with proper support)

Regulatory

• Emissions
  • FCC - 47 CFR Part 15, Subpart B Class A
  • CE - EN5502 Class B
  • CE - EN6100-3-2
  • AS/NZS 3548, Class A
  • CISPR22
  • ICES-003
• Immunity
  • CE - EN50130-4
  • UL 60950-1
• Safety
  • CSA 22.2 60950-1
  • EN 60950-1
  • IEC 60950-1

ADSDU8ERHVC Specifications PDF