[DISCONTINUED]VR48RKIT American Dynamics Matrix Mega Power Rack Mount Kit

The MegaPower 48 Plus Matrix Switcher/Controller System takes the modular design and high-end functionality of the MegaPower 48 to new levels of flexibility and performance for the small to mid-sized application. Features standard to our largest matrix switchers – macro control, recorder control, a choice of keyboards, a complete offering of programmable functions – are augmented with several exciting enhancements.
For one, the MegaPower 48 Plus is an Ethernet Cat 5 IP enabled matrix that can operate as a stand-alone system or as part of a network. Choose from one of three expansion modes and grow your system by up to 288 inputs. Whether used as a centralized or distributed system, the MegaPower 48 Plus can be cost-effectively installed and optimized for the most challenging of site requirements.

Specifications

Operational

• Bandwidth - 10 MHz
• Frequency Response - ± 1.0 dB to 6 MHz
• S/N Ratio - 60 dB (Vp-p vs. Vrms noise)
• Crosstalk
  • Adjacent Channels - ≤ -55 dB (at 3.58 MHz)
  • Input to Input - ≤-70 dB (at 3.58 MHz)
• Differential Delay - ± 1.0°
• Differential Phase - ≤ 0.5°
• Differential Gain - ≤1.5%
• Tilt - ≤2.0%
• Gain - Unity ± 1 dB
• Return Loss (Input/Output) - 40 dB
• DC Level (Video Signal) - 0 Volts (± 0.1 V typical)
• Switching - Complete switching of crosspoint matrix. EIA RS-170 and NTSC, CCIR and PAL
• Switching Speed - Less than 20 ms (typical)
• On-Screen Text - Date/time, video input number, video
• Outputs 1-8 - input or preset title (16 characters), monitor status, alarm title (48 characters)
• Character Set - English, French, Italian, German, Spanish, Portuguese
• Connectors (per system)
  • Video Inputs - 48 BNC composite, 0.5 to 2.0 Vp-p
  • Video Outputs - 16 BNC composite, 1.0 Vp-p, (with nominal input)
  • RS-232 - Eight 8-pin RJ-45 optional port expander extends each port to 4
  • Network - Ethernet, IEEE 802.3, 10 Mbps, TCP/IP
  • Utilization - < 2.5%
  • Connection - RJ-45, Cat 5 wiring
  • Protocol - IP, fixed addresses, supports gateway connection
  • External Modem - One DB9 connector (Hayes AT compatible)
  • SensorNet - Six ports through terminal screw connectors
  • SEC RS-422 - Six ports through terminal screw connector
  • Manchester - One port through terminal screw connector
  • Alarm Inputs - 16 inputs through two 16-pin terminal screw connectors
  • Relay Outputs - Two Form-C relays through two 3-pin terminal screw connectors
  • Power - One 3-pin terminal screw connector
  • Flash Memory Module - One 8-pin header

Electrical

• Power Source - 24 VAC external transformer
• Supply Voltage - 90-132 VAC, 47-63 Hz 195-253 VAC, 47-63 Hz
• Power Requirements - 30 watts maximum

Mechanical

• Mounting - Vertical wall or 19-inch EIA rack mount
• Dimensions (H x W x D) - 50.8 x 43.8 x 8.9 cm (20 x 17.3 x 3.5 in)
• Unit Weight
  • Wall Bracket - 1.54 kg (3.4 lbs)
  • Patch Panel Assembly - 1.72 kg (3.8 lbs)
  • Main Electronics Unit - 2.72 kg (6.0 lbs)
  • Total - 5.97 kg (13.2 lbs)
• Transformer Weight - 2.17 kg (4.8 lbs)
• Color - Black

Environmental

• Operating Temperature - 0° to 50° C (32° to 122° F)
• Humidity - 5 to 95% RH (non-condensing)
• Storage - 40° to 70° C (-40° to 155° F)

Regulatory

• Emissions
  • FCC Part 15, Class A
  • EN55022 (CE)
• Immunity - EN50130-4 (CE)
• Safety
  • UL1950
  • CSA 22.2, No. 950 (cUL)
  • EN60950 (CE)

VR48RKIT Specifications PDF