S6230-ESG0 Pelco 4.3~129mm 30x Optical Zoom 60FPS @ 1080p Outdoor IR Day/Night WDR PTZ IP Security Camera 24VAC/24VDC/HPoE/PoE+ - Stainless Steel - Smoked Dome w/ Gray Back Box

Specifications

Camera/Optics

• Sensor Type - 1/2.8-inch Type Exmor CMOS Sensor
• Optical Zoom - 30X
• Digital Zoom - 12X
• Maximum Resolution - 1920 x 1080
• Lens -f/1.6 ~ f/4.7, focal length 4.3 mm (wide) ~ 129.0 mm (tele)
• Horizontal Angle of View - 59.5° (wide) ~ 2.1° (tele)
• Light Sensitivity - Color (33 ms) 0.20 lux, Color (250 ms) 0.025 lux, Mono (33 ms) 0.06 lux, Mono (250 ms) 0.008 lux
• Day/Night Capabilities - Yes
• IR Cut Filter - Yes
• Wide Dynamic Range - 130 dB
• Iris Control - Auto iris with manual override
• Backlight Compensation - Yes
• Automatic Gain Control - Yes
• Active Noise Filtering - Yes
• Electronic Image Stabilization (EIS) - Yes

Video

• Video Encoding - H.264 High, Main, or Base profiles and MJPEG
• Video Streams - Up to 2 simultaneous streams; the second stream is variable based on the setup of the primary stream
• Frame Rate - Up to 60, 50, 30, 25, 15, 12.5, 10, 8.333, 7.5, 6, 5, 3, 2.5, 2, 1 (depending on the coding, resolution, and stream configuration)

Network

• Supported Protocols - TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, IPv6*, SNMP v2c/v3, QoS, HTTP, HTTPS, LDAP (client), SSH, SSL, SMTP, FTP, and 802.1x (EAP)
• Users - Unicast Up to 20 simultaneous users depending on resolution settings (2 guaranteed streams), Multicast Unlimited users H.264
• Security Access - Password protected
• Software Interface - Web browser view and setup
• Pelco System Integration - Endura 2.0 (or later) Digital Sentry 7.3 (or later)
• Open API - Pelco API or ONVIF Profile G and Profile S
• Mobile Application - Integrated to Pelco Mobile App
• Video Motion Detection - Simple motion detection and camera sabotage
• Local Storage - 32 GB SD Card; Capture 1–5–10 second video clips on camera sabotage, motion detection, or alarm input; record video continuously in the case of network outage with option to overwrite; access video through FTP protocol and ONVIF Profile G

Minimum System Requirements

• Processor - Intel Core i3 Processor, 2.4 GHz
• Operating System - Windows 7 (32-bit and 64-bit) with DirectX 11, Windows XP Service Pack 3 with DirectX 9.0c, or Mac OS X 10.4 (or later)
• Memory - 4 GB RAM
• Network Interface Card - 100 megabits (or greater)
• Monitor - Minimum of 1024 x 768 resolution, 16- or 32-bit pixel color resolution
• Web Browser - Internet Explorer 8.0(or later) or Firefox 3.5 (or later); Internet Explorer 8.0 (or later) is recommended for configuring analytics
• Media Player - Pelco Media Player† or QuickTime 7.6.5 for Windows XP and Windows 7; or QuickTime 7.6.4 for Mac OS X 10.4 (or later)

Analytics

• Required Systems for Pelco Analytics Pelco Interface - WS5200 Advanced System Management Software on an Endura 2.0 (or later) system
• Open API - The Pelco API can transmit behavior alarm data to third-party applications

General

• Construction Back Box - Aluminum
• Dome Drive - Aluminum, thermo plastic
• Lower Dome - Acrylic
• Stainless Steel Construction Back Box - 316 stainless steel; gray, polyurethane powder coated finish
• Lower Dome - 316 stainless steel; black, polyurethane powder coated finish
• Bubble - Acrylic, clear or smoked
• Light Attenuation - Smoked f/0.5 light loss, Clear f/0.0 light loss
• Cable Entry (back box) In-Ceiling - 0.75-inch conduit fitting
• Pendant - Through 1.5-inch NPT pendant mount
• Weight (approximate) - 14.3lb, 19lb Shipping

Alarm

• Unsupervised - Detects open or closed alarm state
• Supervised - Detects open and short alarm state with external 1-kohm resistor
• Input - 3.5 VDC maximum, 3.5 mA maximum
• Relay Output - ±32 VDC maximum, 150 mA maximum

Audio

• Input/Output - Line level/external microphone input; 600-ohm differential, 1Vp-p maximum signal level

Mechanical

• Variable Speed - 0.1° to 80°/sec (manual pan speed)
• Preset Accuracy - ±0.1°
• Pan Movement - 360° continuous pan rotation
• Vertical Tilt - +1° to –90°
• Maximum Pan Speed - Up to 450° per second
• Maximum Tilt Speed - Up to 450° per second
• Preset Speeds - Pan 450°/sec, Tilt 450°/sec

Electrical

• Ports - RJ-45 connector for 100Base-TX Auto MDI/MDI-X Autonegotiate/manual setting
• Cabling Type - Cat5e or better for 100Base-TX
• Input Voltage - 18 to 32 VAC; 24 VAC nominal 22 to 27 VDC; 24 VDC nominal
• Input Power - 24 VAC 24 VA nominal (without heater and blower); 81 VA nominal (with heater and blower), 24 VDC 1 A nominal (without heater and blower); 3 A nominal (with heater and blower), PoE+ 18 W, Environmental models (with heater on); 15 W, Non-Environmental (with heater off), HPoE 60 W, Environmental models (with heater on); 15 W, Non-environmental (with heater off)

S6230-ESG0 Spec Sheet