FVT110M1/BO Comnet Digitally Encoded Video Transmitter/Data Transceiver MM 1 Fiber

The ComNet FVT110(M,S)1/BO is a video and data transmitter that, when paired with the FVR110(M,S)1, supports the simultaneous transmission of short haul quality 10-bit EIA RS-250C digitally encoded video and bi-directional data over one multimode or single mode optical fiber.

Specifications

Video

• Video Input - 1 V pk-pk (75 Ω)
• Overload - >1.5 V pk-pk
• Bandwidth - 5 Hz - 6.5 MHz
• Differential Gain - <2%
• Differential Phase - <0.7˚
• Tilt - <1%
• Signal-to-Noise Ratio (SNR) - 67 dB @ Maximum Optical Loss Budget
• Max. RG-59 COAX Distance - 100 m (300 ft) Camera to Fiber Optic Module to maintain 6 Mhz Bandwidth

Data

• Data Interface - Bosch BiLinx and Bi-phase
• Data Format - NRZ, NRZI Manchester and Bi-phase
• Data Rate - DC-250 Kbps (NRZ)

Wavelength - 1310/1550 nm, MM and SM

Optical Emitter - Laser Diode

LED Indicators - Link › Video › Data › Power

Connectors

• Optical - 1 ST connector
• Power - Terminal Block
• Video - BNC (Gold Plated Center-Pin)
• Data - Terminal Block

Power

• Operating Power - Supplied from Dome

Electrical & Mechanical

• Current Protection - Automatic Resettable Solid-State Current Limiters
• Circuit Board - Meets IPC Standard
• Shipping Weight - <1 lb / 0.45 kg

Environmental

• MTBF - >100,000 hours
• Operating Temp - -40˚ C to +75˚ C
• Storage Temp - -40˚ C to +85˚ C
• Relative Humidity - 0% to 95% (non-condensing)¹

FVT110M1/BO Specifications PDF

FVT110M1/BO Manual