FVR4014M1SHR Comnet 4-Channel Digitally Encoded Video Multiplexer

The ComNet FVT/FVR4014 video transmitter/data transceiver and video receiver/data transceiver series utilize 10-bit digital encoding and decoding for high-quality video transmission that meets the requirements of EIA RS-250C for short-haul video transmission.

Specifications

Video

• Video Input - 1 volt pk-pk (75 ohms)
• Overload - >1.5V pk-pk
• # Input/Output Channels - 4
• Bandwidth (minimum) - 10 Hz - 6.5 MHz per channel
• Differential Gain - <2%
• Differential Phase - <0.7 ̊
• Tilt - <1%
• Signal-to-Noise Ratio (SNR) - 67 dB Typical
• Max. RG-59 COAX Distance - 100m (300ft) Camera to Fiber Optic Module to maintain 6Mhz Bandwidth

Data

• Data Channels - 4
• Data Interface - RS232, RS422 and RS485 (2W/4W)
• Data Format - NRZ, NRZI, Manchester, Bi-Phase and Sensornet
• Data Rate - DC-250 Kbps (NRZ)
• Bit Error Rate - <1 in 10-9 @ Maximum Optical Loss Budget
• Operating Mode - Simplex or Full-Duplex

Wavelength - 1310/1550 nm, Multimode and Single Mode

Number Of Fibers - 1

Led Indicators

• Video Sync Presence for Each Video Channel
• Received Data
• Transmitted Data
• Optical Carrier Detect

Optical Emitter - Laser Diode

Connectors

• Optical - ST
• Power - Terminal Block
• Video - BNC (Gold Plated Center-Pin)
• Data - RJ45 (5 pcs. Included)

Electrical & Mechanical

• Power
• Surface Mount - 8-15 VDC @ 4W
• Rack Mount - From Rack
• Number of Rack Slots - 2
• Current Protection - Automatic Resettable Solid-State Current Limiters
• Circuit Board - Meets IPC Standard
• Size (in./cm) (L×W×H) - 6.1 × 5.3 × 2.2 in., (15.5 × 13.5 × 5.6 cm)
• Shipping Weight - <2 lb./0.9 kg

Environmental

• MTBF - >100,000 hours
• Operating Temp - -40° C to +75° C
• Storage Temp - -40° C to +85° C
• Relative Humidity - 0% to 95%, non-condensing

FVR4014M1SHR Specifications PDF

FVR4014M1SHR Manual