FVT80D2SFP Comnet 8 Channel Video 2 Channel Data / 1 Channel Contact

The ComNet FVT/FVR80D2SFP series optical video link provides transmission of eight 10-bit short-haul quality digital video channels, two bi-directional data channels and one bi-directional contact closure channel through a selectable small form factor pluggable module (SFP). The data channels support RS232, RS422 and 2 wire and 4 wire RS485. Plug-and-play design ensures ease of installation and no electrical or optical adjustments are ever required.

Specifications

Video

• Video Input - 1 volt pk-pk (75 ohms)
• Overload - >1.5 V pk-pk
• Bandwidth - 5 Hz - 6.5 MHz
• Differential Gain - <2%
• Differential Phase - <0.7º
• Tilt - <1%
• Signal-to-Noise Ratio (SNR) - 67 dB @ Maximum Optical Loss Budget
• Max. RG-59 COAX Distance - 100 m (300 ft) Camera to Fiber Optic Module to maintain 6 Mhz Bandwidth

Data

• Data Interface - RS232, RS422 and RS485 (2W/4W)
• Data Format - NRZ, NRZI, Manchester, Bi-Phase and Sensornet
• Data Rate - DC-250 Kbps (NRZ)

Contact Interface

• Response Time - 0.5 msec
• Input - Dry Contact Closure
• Output - SPST Relay, 0.5 A Contact Rating – normally open

Connectors

• Optical - SFP modules
• Power - Terminal Block
• Video - BNC
• Data - Terminal Block
• Contact Closure - Terminal Block
• Wavelength - SFP dependent
• Number of Fibers - SFP dependent
• Optical Emitter - SFP dependent

Indicating LEDs

• Fiber Status
• Received Data
• Video Sync Presence
• Transmitted Data
• Power

Power

• Surface Mount - 8 to 15 VDC
• Power Consumption - 5 W
• Rack Mount - From Rack

Electrical & Mechanical

• Number of Rack Slots - 3
• Current Protection -Automatic Resettable Solid-State Current Limiters
• Circuit Board - Meets IPC Standard
• Size (in./cm) (L×W×H) - 6.1 × 5.3 × 2.2 in (15.5 × 13.5 × 5.6 cm)
• Shipping Weight - <2 lb / 0.9 kg

Environmental

• MTBF - >100,000 hours
• Operating Temp - -40˚ C to +75˚ C
• Storage Temp - -40˚ C to +85˚ C
• Relative Humidity - 0% to 95% (non-condensing)

FVT80D2SFP Specifications PDF