CNFE1S2-5 Comnet Fiber Optic Ethernet Products Ethernet Media Converters Ethernet to Optical Fiber

The ComNet Ethernet internal mounted media converters are designed to transmit and receive 10/100 Mbps data over multimode or single mode optical fiber. The electrical interface will Auto-Negotiate to a 10 Mbps, or 100 Mbps Ethernet rate without any adjustments. The optical interface operates at a 100 Mbps Ethernet rate. These media converters are environmentally hardened to operate in extreme temperatures. LED indicators are provided for rapidly ascertaining equipment operating status. The CNFE1/X do not have a metal enclosure and are designed to be incorporated within a device.

Specifications

Data

• Data Interface - Ethernet
• Data Rate
  • 10/100 Mbps
  • IEEE 802.3 Compliant
  • Full or Half Duplex Electrical Port/ Full Duplex Optical Port

Connectors

• Optical - ST or SC, 1 or 2 Fibers
• Power - Screw Terminals
• Electrical - RJ45
• LED Indicators - Optical Link/Data Activity - Power

Power

• Operating Voltage Range - 22-27 VAC or 8-24 VDC
• Power Consumption - 3W AC or 6W VDC

Electrical & Mechanical

• Circuit Board - Meets IPC Standard
• Size (L×W×H) - 1.9 × 1.9 × 1.1 in, (5 × 5 × 2.8 cm)
• Shipping Weight - <1 lbs./0.9 kg

Mounting Hardware (Not Included)

• Screw Size - 2.5 mm
• Min. Standoff Height - 8 mm
• SAE requirements - #2-56 × 3/16" long Nylon Pan Head Screw as a minimum into a 3/16" Nylon Hex Standoff that is #2-56 thread × 3/8" long minimum

Environmental

• MTBF - >100,000 hours
• Operating Temp - -40˚ C to +75˚ C
• Storage Temp - -40˚ C to +85˚ C
• Relative Humidity - 0% to 95% (non-condensing)

CNFE1S2-5 Specifications PDF

CNFE1S2-5 Installation Manual