FDHA4-M1R-WSA KBC Networks 4-ch point-to-point simplex 10-bit video receiver 1 fiber 1310nm multi-mode 12dB optical loss budget Desktop/wall-mount ST connector US power plug

The KBC FDVA series uses the most advanced digital technologies to provide excellent repeatable performance for today™s CCTV systems. It supports transmission of one analog composite video channel over one multimode or singlemode optical fiber. Products with one, two or four individual modules within a single unit are available, offering substantial savings in racking and power requirements on site. PAL, NTSC and SECAM video standards are fully supported. The series is available in compact wall-mount or 3U chassis card.

Specifications

Video

• No. of Channels(1) - 1
• Format - PAL / NTSC / SECAM
• Input/Output - 1.0V pk-pk typical, 75Ω
• Bandwidth - 5 Hz ~ 6.5 MHz
• Digital Encoding (non compressed) - 8 bit
• Differential Gain (10-90% APL) - <2.0%
• Differential Phase (10-90% APL) - <2.0™
• SNR - >60dB

Optical

• Wavelength - 1310nm
• Fiber - Multimode or Singlemode
• Number of Fibers - 1

Power

• Power Input(2)
  • Compact - 12-24 Vac/dc @ 120mA
  • Wall-mount - 12-24 Vac/dc @ 400mA
• Power Supply(3) - Input: 100 ~ 240 Vac Output: +12 Vdc
• Chassis Card - UL and cUL listed PSU Supplied from FR3 PSU

Environmental

• Operating Temperature - -40™~+74™C / -40™~+165™F
• Storage Temperature - -40™~+74™C / -40™~+165™F
• Operating Humidity - 0 to 95% non-condensing
• Mean Time Between Failure (MTBF) - >100,000 Hours

Mechanical

• Dimensions
  • Compact L x W x H (7) - 70mm x 58mm x 28mm (2.8™ x 2.3™ x 1.1™)
  • Wall-mount L x W x H) - 155mm x 90mm x 36mm (6.1™ x 3.5™ x 1.4™)
• Number of 3U Chassis Card Slot(4) - 1

Connectors

• Video - BNC 75Ω
• Fiber - ST, SC or FC (ST fitted as standard)
• Power(5) - Screw Block Terminal (for Compact and wall-mount)

FDHA4-M1R-WSA Specifications PDF