FPID4-MT KBC Networks 4-ch point-to-point duplex contact closure 1 fiber 12dB optical loss budget multi-mode transmitter Desktop/wall-mount ST connector US power plug

The KBC FPI series is part of the ASFOM product family and provides unique, user-configurable solutions for contact closure signals. It supports transmission of up to 256 simplex or duplex contact closure signals over either one or twomultimode or singlemode optical fibers. Due to the ASFOM flexibility, duplex solutions can either be symmetrical or asymmetrical with respect to the signal quantities. The plug-and-play design ensures ease of installation with no electrical or optical adjustment needed. LED indicators are provided to show the operational status of the unit clearly. Depending on system requirements, units are available in wall-mount, 1U or 2U 19” rack or 4U chassis card.

Specifications

Contact Closure

• Response Time - 500μs
• Input - Dry Contact Closure, TTL
• Output - SPST Relay, Normally Open
• Switch Rating - 1A @ 30 Vdc max, 0.5A @ 125 Vac max

Optical

• Wavelength - 1310nm, 1550nm
• Fiber - Multimode, Singlemode
• Number of Fibers - 1 or 2

Power

• Power Input Wall-mount - +12-24 Vac/dc
• Power Supply for Wall-mount(1) - Input: 100 ~ 240 Vac Output: +12 Vdc
• Rack Module(1) - Input: 100 ~ 240 Vac @ 2A
• Chassis Card - Supplied from FR3 or FR4 PSU

Environmental

• Operating Temperature - -40°~+74°C / -40°~+165°F
• Storage Temperature - - 40°~+74°C / -40°~+165°F
• Operating Humidity - 0 to 95% non-condensing
• Mean Time Between Failure (MTBF) - >100,000 Hours

Mechanical

• Dimensions
  • Compact wall-mount (L x W x H)(5) - 135mm x 116mm x 36mm (5.31” x 4.57” x 1.42”)
  • Wall-mount (L x W x H) - 221mm x 155mm x 36mm (8.7” x 6.1” x 1.42”)
• Rack
  • 1U - 19” 1U
  • 2U - 19” 2U
• Number of 4U Chassis Card Slots(2) - Depends on product configuration

Connectors

• Contact Closure - 8-way screw block terminal
• Fiber - ST, SC or FC
• Power(3)
  • Wall-mount - Screw block terminal
  • Rack - IEC

FPID4-MT Specifications PDF