The cart is empty.
Dealers. First. Always.
DWG

EC-1504U-W Pelco EC L or R 4 Port Extender Cat5 Pass Through 15 Watts PoE

SKU: EC-1504U-W
  • Transmits Individual Ethernet Data Channels with Pass-Through Power over Ethernet (PoE) over Standard Cat5/Cat5e/Cat6 UTP Cable or Coaxial Cable
  • Extends Ethernet up to 914 m (3,000 ft) at 10 Mbps or 610 m (2,000 feet) at 100 Mbps over Cat5/Cat5e/Cat6 UTP Cable
  • Extends Ethernet up to 1,524 m (5,000 ft) at 10 Mbps or 549 m (1,800 ft) at 100 Mbps over Coaxial Cable
  • Extended Temperature Operation from —40º to 75ºC (—40º to 167ºF)
  • Extended Pass-Through PoE Meets the IEEE802.3af Standard for Power over Ethernet
  • Full 10/100 Mbps Bandwidth
  • Supports Multicast, Unicast, and Jumbo Frame
  • Symmetric Bandwidth Provides Consistent Upload and Download with Virtually Zero Packet Loss over the Total Usable Distance
More details...
UPC Number: 700880329368
MSRP Price: $1,748.00
Online Price: $1,748.00
Save to my Wish List
Product Details

The EC-1500C Series is ideally suited for applications where the existing coaxial cable needs to be leveraged for transmission of IP signals. For UTP applications, the EC-1500U Series is an effective Cat5/Cat5e/Cat6 UTP extender device beyond the 100 m (328 ft) limit of traditional Ethernet. In addition, for system configurations that have a single cable connected to the camera, the EC-1500C/U Series can pass through PoE (up to 15 W) to the camera. Designed to be a cost-effective, general-use product, the EC-1500C/U Series provides maximum flexibility in these applications without any programming. The EthernetConnect EC-1500C/U Series is used to extend Ethernet over copper (EoC)

The EC-1500C Series extends up to 16 ports of 10/100 Mbps Ethernet with pass-through PoE over coaxial cable. The EC-1500U Series extends up to 16 ports of 10/100 Mbps Ethernet with pass-through PoE over twisted pair Cat5/Cat5e/Cat6 UTP cable. Single-channel units can be powered from a PoE source, allowing for an installed network wh e power is not readily available. The EC-1500C/U Series units provide the ultimate flexibility for extending a powered device (PD) over long distance copper. DIP switches are provided for the user to select local or remote settings. All application configurations should be verified at the time of ordering to facilitate ease of installation.


Specifications


ELECTRICAL

  • Operating Voltage - 9 VDC† when in a USRACK or EURACK
  • Current Protection - Automatic resettable solid-state current limiters
  • MTBF - >100,000 hours
  • LED Indicators - Operating power; Ethernet speed; Ethernet link and activity; extended link and activity

DATA

  • Data Interface - 10/100Base-T Ethernet
  • Data Rate - DIP switch selectable 10/100 Mbps; full data rate/full-duplex up to the maximum rated distance
  • RFC - 2544 TCP/IP packet transmission
  • Standards
    • PoE - IEEE802.3af
    • RFC - 768 UDP, 2068 HTTP, 793 TCP, 791 IP, 1783 TFTP, 894 IP over Ethernet

MECHANICAL

  • Ethernet - RJ-45
  • Extended Interface
    • Coaxial - Female BNC
    • UTP - RJ-45
  • Operating Power - Powered by PoE or two-pin screw terminal

GENERAL

  • Dimensions - 15.5 x 13.5 x 2.8 cm (6.1" D x 5.3" W x 1.1" H)
  • Operating Temperature - –40° to 75°C (–40° to 167°F)
  • Storage Temperature - –40° to 80°C (–40° to 176°F)
  • Relative Humidity - 0% to 95%, noncondensing
  • Shipping Weight - <0.9 kg (2 lb)

EC-1504U-W Specifications PDF


Product Reviews

Write your own review

 

Rate this product:


DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900
Connect with us on Social Media   Facebook   Instagram   Twitter   Linked In