IME229-1IS Pelco 3-9mm Varifocal 60FPS @ 1920 x 1080 Indoor Day/Night WDR Dome IP Security Camera 12VDC/24VAC/POE

The IME Series contains an integrated varifocal MPx autofocus lens (3 ~ 9 mm). Form factors include indoor and outdoor domes. All models feature a sturdy design that is both vandal- and tamper-resistant. The environmental model features worry-free use in a wide range of environmental operating conditions.

Specifications

Camera

• Imaging Device - 1/2.8-inch
• Imager Type - CMOS
• Imager Readout - Progressive scan
• Highest Resolution
  • 3 MPx 2048 x 1536
  • 2 MPx - 1920 x 1080
  • 1.3 MPx - 1280 x 960
• Signal-to-Noise Ratio - >60 dB
• Electronic Shutter Range - 1/20000 sec (or faster) to 2 sec
• Wide Dynamic Range - 130 dB
• White Balance Range - 2,000° to 10,000°K
• Sensitivity 3 ~ 9 mm - f/1.3; 2,850°K; SNR >20 dB
• Color (33 ms) - 0.050 lux
• Color (500 ms) - 0.005 lux
• Mono (33 ms) - 0.010 lux
• Mono (500 ms) - 0.001 lux
• Mono (IR on) - 0.000 lux
• Day/Night Capabilities - Yes
• Mechanical IR Cut Filter - Yes, (ON/OFF/AUTO selectable), with different set points on lux
• Adaptive IR Illumination - 850nm wavelength, maximum distance of 30 meters (100 feet) IR illumination at 0 lux
• SD Card Support - Up to 128 GB
• SDHC/SDXC Cards Supported - Yes

Lens

• Lens type - Built-in; varifocal
• Focal Length - f/1.3, 3 ~ 9 mm
• Focus - Autofocus, motorized
• Zoom - Remote
• Auto Iris Type - DC drive P-iris lens

Audio

• Streaming - Bidirectional: full or half duplex
• Input/Output - Line level/external microphone input; Single-ended, stereo, 1 Vp-p max. signal level
• Compression - G.711 PCM 8 bit, 8 kHz mono at 64 kbit/s

Mechanical

• Dome Attenuation
  • Clear - f/0.0 light loss
• Pan/Tilt Adjustment - Manual
  • Pan - 355°
  • Tilt - 75°
  • Rotate - 340°

Physical

• Weight Shipping
  • Indoor, Surface Mount - 1020 gm (2.25 lb)
  • Environmental, Surface Mount -1020 gm (2.25 lb)
• Product Box Dimensions (approximate) - 6.75 x 6.75 x 6.75 in.

Environmental

• Operating Temperature
  • Indoor/Vandal-Resistant -–10° to 55°C (14° to 131°F)†
  • Environmental - –40° to 55°C (–40° to 131°F)†
• Start-up Temperature
  • Indoor - –10°C (14°F)
  • Environmental - With heater, –40°C (–40°F)
• Storage Temperature
  • Indoor and Environmental - –40° to 60°C (–40° to 140°F)
• Operating Humidity
  • Indoor/Vandal-Resistant - 10 to 90%, RH noncondensing
  • Environmental - 0 to 90%, RH noncondensing
• Storage Humidity - 20 to 80%, RH noncondensing
• Impact Resistance - IK10 (20J) per IEC 62262

Electrical

• Network - RJ-45 connector for 100Base-TX; Auto MDI/MDI-X
• Cable Type - Cat5 or better for 100Base-TX
• Input Power - PoE (IEEE 802.3af, Class 3), 24 VAC, 12 VDC
• Power Consumption - Up to 12 W nominal
• Current Consumption - 330 mA @ POE; 0.5 mA @ 24 VAC; 1A @ 12 VDC
• Local Storage - SD, SDHC, SDXC
• Alarm Input - Detects open or closed alarm state; 5 VDC maximum, 0.5 mA maximum
• Relay Output - ±350V VDC maximum, ±130 mA maximum

Network

• Supported Protocols - TCP/IP, UDP/IP (Unicast, Multicast IGMP), UPnP, DNS, DHCP, RTP, RTSP, NTP, IPv4, IPv6, SNMP v2c/v3, QoS, HTTP, HTTPS,SSH, SSL, SMTP, FTP, ARP, ICMP, and 802.1x (EAP)
• Users
  • Unicast - Up to 20 simultaneous users depending on the resolution settings
  • Multicast - Unlimited users H.264
  • Security Access - Password protected
  • Software Interface - Web browser view and setup

• Video Streams - Independently configurable primary and secondary streams plus service stream
• Frame Rates< - Up to 60, 50, 30, 25, 20, 16, 15, 12, 10, 8, 7, 6, 5, 4, 3, 2, 1 (depending on the coding,
• Video Encoding - H.264 High, Main, and Baseline profiles; and MJPEG
• Bit Rate Control - Constrained variable bit rate (CVBR) and constant bit rate (CBR)
• Service Stream - JPEG stream; the JPEGs will be the same resolution as the primary stream

IME229-1IS Specifications PDF