TFT100-4 Platinum Tools Fault Trapper Master Pack Carton - 4 Pcs

Stop guessing about live circuit issues! For the first time, you can detect the type of fault and locate the position of an electrical fault that causes intermittent or persistent circuit breaker trips, thus giving you the critical information needed to reduce call backs for circuit breaker trips.The Fault Trapper is a new class of tester using Spread Spectrum Time Domain Reflectometry (SSTDR) to monitor energized circuits. Running on in-line power for extended battery life, it captures time and distance to Intermittent Opens, Shorts and Arc Faults saving the event information in memory for later investigation. The in-line 40 Amp Module isolates the circuit being monitored from the breaker panel and all other breakers. The last faults can be viewed off-line using the back-up battery.Fault Trapper allows unattended monitoring of energized dedicated circuits to locate fault on the line. Connect the Fault Trapper to your circuit, press the Test button to begin monitoring and walk away. Come back later or the next day to find out the why-when-and-where’s faults are occurring on the circuit and causing the circuit breaker to trip.

Specifications

• Physical Dimensions
  • Fault Trapper Meter (Main Unit) Size: 15.25 x 7.6 x 3.8 cm (6.0 x 3.0 x 1.5 inches)
  • Weight: 255 grams (9 oz.) With battery
• Input Rating - Fault Trapper Meter (Main Unit) 90 to 265 Volts AC RMS 50/60Hz, 4 Watts max.
• Measurement
  • Method: Spread Spectrum Time Domain
  • Reflectometry (SSTDR)
  • Accuracy: +/- 10% of the reading
  • Maximum Length: 300 ft on NM-B or Wire in Conduit
• Battery Use and Life - Used to view results when not AC powered Battery Low Level: Approximately 5.5 volts Battery Life (9 Volt alkaline battery, typical) Standby Mode (Non-viewing): 2 years Active Viewing Mode: 4 hours typical
• Environmental Temperature
  • Operating: 0 to 50°C (32 to 122°F)
  • Storage temperature: -20 to 60°C (-4 to 140°F)
  • Long Term Storage w/ battery: 35°C maximum (95°F)
  • Humidity: 10% to 90%, non-condensing
  • Altitude: 2,000 meters (6,561ft) maximum
• Rating - 300V CAT III, 120/240Vac, 40 amps or less, single phase.
• Safety Compliance - TüV-tested to UL 61010-1:2012, CAN/ CSA-C22.2 No. 61010-1-12
• UPC Code - 849160000000
• Warranty - 1 year

TFT100-4 Specifications PDF