524179 Intellinet Power over Ethernet (PoE) Injector 1 Port - 48 V DC - IEEE 802.3af Compliant

The INTELLINET NETWORK SOLUTIONS Power over Ethernet Injector allows you to connect your IEEE 802.3af-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af powered device (PD) to a switch.

Specifications

Standards

• IEEE 802.3af (Power over Ethernet)
• IEEE 802.3 (10Base-T Ethernet)
• IEEE 802.3u (100Base-TX Fast Ethernet)

General

• Media support:
• 100Base-TX Cat5 UTP/STP RJ-45, 8 pin
• Ports
• 1 RJ-45 100 Mbps input port
• 1 RJ-45 100 Mbps data and power output ports
• 1 power input connector (3 pin)
• Protection functions:
• Short-circuit protection for short GND
• Overload protection for currents over 450 mA
• High-voltage protection for output voltage exceeding 52 V
• Compatibility - general: all IEEE 802.3af-compliant PoE devices
• Supported INTELLINET NETWORK SOLUTIONS products:
• Wireless 300N Access Points (524735, 524711)
• High Power Wireless G Access Point (503082)
• PoE Splitter (502900)
• Network Cameras (550932 NBCC30-IR, 550963 NFC30-IR, 550949 NFC30, 550987 NFD30, 551021 NFC31, 551045 NFC31-IR)
• Certifications: FCC Class B, Part 15, CE 89/336/EEC

RJ-45 Input Connector Pinout

• Pin 1: Rx+ (data receive)
• Pin 2: Rx- (data receive)
• Pin 3: Tx+ (data transmit)
• Pin 4: NC (not connected)
• Pin 5: NC (not connected)
• Pin 6: Tx- (data transmit)
• Pin 7: NC (not connected)
• Pin 8: NC (not connected)

RJ-45 Output Connector Pinout (Data + Power)

• Pin 1: Rx+ (data receive)
• Pin 2: Rx- (data receive)
• Pin 3: Tx+ (data transmit)
• Pin 4: -Vdc_return (+) (feeding power [+])
• Pin 5: -Vdc_return (+) (feeding power [+])
• Pin 6: Tx- (data transmit)
• Pin 7: -Vdc (feeding power [-])
• Pin 8: -Vdc (feeding power [-])

LEDs

• AC Powered (red)
• Channel Powered (green)
• Channel Alarm (red)

Power

• Input: 100 — 240 V AC, 50 — 60 Hz
• Output: 48 V DC / 350 mA
• Power consumption: 19 Watts (maximum)

Environmental

• Plastic housing (ABS)
• Dimensions: 120 (L) x 50 (W) x 35 (H) mm (4.7 x 2.0 x 1.4 in.)
• Weight: 0.14 kg (0.3 lbs.)
• Operating temperature: 0 — 60^ºC (32 — 140^ºF)
• Operating humidity: 10 — 90% RH, non-condensing
• Storage temperature: -20 — 85^ºC (-4 — 185^ºF)

Package Contents

• Power Over Ethernet Injector
• Power cable
• Instruction sheet

524179 Specifications PDF