561037 Intellinet Gigabit High-Power PoE+ Injector 1 x 30 W Port - IEEE 802.3at/af Compliant - Plastic Housing

The Intellinet Gigabit High-Power PoE+ Injector allows you to connect your IEEE 802.3af/at-compliant products to a non-PoE LAN switch port. The injector can be used to connect a wireless access point, IP phone, network camera or any IEEE 802.3af/at-powered device (PD) to a switch. The device has an output power rating of up to 30 watts. That's enough for even power-hungry PoE devices.

Specifications

Standards

• IEEE 802.3af (Power over Ethernet)
• IEEE 802.3at (High-Power PoE+ Power over Ethernet)
• IEEE 802.3 (10Base-T Ethernet)
• IEEE 802.3ab (Gigabit Ethernet)
• IEEE 802.3u (100Base-TX Fast Ethernet)
• IEEE 802.3x (flow control, for full duplex mode)

General

• Media support:
• 100Base-TX Cat5 UTP/STP RJ45, 8 pin
• 1000Base-T Cat5e UTP/STP RJ45, 8 pin
• Ports:
• One RJ45 10/100/1000 Mbps input port
• One RJ45 10/100/1000 Mbps data and power output port
• Protection functions:
• Short circuit protection for short GND
• Overload protection for currents over 0.6 A
• PoE Pinout: IEEE 802.3af/at Standard Mode A
• Pin 1: DC (+)
• Pin 2: DC (+)
• Pin 3: DC (-)
• Pin 6: DC (-)
• Certifications: FCC Class A, CE, UL

LED

• Dual-color power and PoE LED

Power

• Input: 100 — 240 V AC, 50 — 60 Hz
• Power consumption: 35 watts (maximum)

Environmental

• Plastic housing
• Dimensions: 136 (L) x 67 (W) x 34 (H) [mm] / 5.35 (L) x 2.64 (W) x 1.34 (H) [in]
• Weight: 0.19 kg (0.42 lbs.)
• Operating temperature: 0 — 50^ºC (32 — 122^ºF)
• Operating humidity: 10 — 90% RH, non-condensing
• Storage temperature: -20 — 80^ºC (-4 — 176^ºF)

Package Contents

• Gigabit High-Power PoE+ Injector
• Power cable
• Instructions

561037 Specifications PDF