UPT2SVWA000E Videote Outdoor PTZ Unit 24VAC with Wiper

ULISSE PTZ camera unit ensures maximum video surveillance coverage in all outdoor environments, even the most difficult.ﾠ ﾠThe accurate top-mount configuration guarantees long-range vision and continuous horizontal axis rotation, combining high speed with absolute tracking accuracy, both in manual mode and in patrol mode.

Specifications

General

• Constructed from aluminium and tecnopolymer
• Epoxypolyester powder painting, RAL9002 colour
• Top mount (OTT)
• Transmission through toothed belt
• Slip-ring
• Electronic limit switches
• Simplified installation thanks to the connector and easy replacement on-site
• Zero backlash
• Configuration of telemetry protocol parameters through dip-switch for RS-485

Mechanical

• Cable glands: 3xM16
• Horizontal rotation: 360^º, continuous rotation
• Vertical rotation: from -40^º up to +90^º
• Horizontal speed (variable): from 0.02^º/s up to 100^º/s (from 0.02^º/s up to 40^º/s, with LED illuminators)
• Tilt speed (variable): from 0.02^º/s up to 40^º/s (from 0.02^º/s up to 30^º/s, with LED illuminators)
• Internal usable area: See drawings
• Accuracy of preset positions: 0.02^º
• Unit weight: 16.3kg (36lb) (16.8kg (37lb), with LED illuminators bracket)

Electrical

• Supply voltage/Current consumption:
• 230Vac, 0.4A, 50/60Hz
• 24Vac, 4A (8A with LED illuminators), 50/60Hz
• 120Vac, 0.8A, 50/60Hz
• Power consumption:
• 100W (150-190W max with LED illuminators in 24Vac)
• 24W, P&T static, heating switched off
• Version with integrated camera:
• 26.5W, P&T static, heating switched off
• Cables input section:
• 0.75mm² (18AWG), 120Vac or 230Vac
• 1.5mm² (16AWG), 24Vac
• Cables signal section: from 0.14mm² (26AWG) up to 0.5mm² (20AWG)
• Housing standard heater: 24Vac, 20W max
• 4 alarm inputs: 10-35Vdc (2 alarm inputs, with LED illuminators)
• 2 dry contacts: 50Vdc max or 30Vac @ 1A (1 dry contact, with LED illuminators)
• Video line: coaxial cable (1Vpp, 75 Ohm)
• Camera power supply: 12Vdc (800mA)
• Power supply to the lens: 6-15Vdc (200mA max)
• Zoom lens controller: polarity inversion and common wire
• Functions: Autopan, Preset, Patrol
• Maximum number of presets for protocol: 250 (VIDEOTEC MACRO)
• 15 characters string for Area and Preset titling
• Configuration through OSM

Communications

• RS-232 interface for firmware update
• 2-ports RS-485 for daisy chain configuration
• Addressable through dip-switch up 255 units

Protocols

• Configuration of telemetry protocol parameters through dip-switch
• AMERICAN DYNAMICS, PANASONIC, PELCO D, VIDEOTEC MACRO, VISTA
• AMERICAN DYNAMICS, PANASONIC, PELCO, VISTA are registered trademarks.
• The product may be interfaced with devices not manufactured by VIDEOTEC. It is possible that the interface protocols have changed or are in a different configuration from earlier tested units by VIDEOTEC. VIDEOTEC recommends a test prior to installation. VIDEOTEC will not be liable for any installation costs or lost revenues in the event a compatibility problem will occur.

Environment

• For installation indoors and outdoors
• Operating temperature
• With heater: from -20^ºC (-4^ºF) up to +60^ºC (140^ºF)
• With reinforced heater: from -30^ºC (-22^ºF ) up to +60^ºC (140^ºF)
• Wind resistance (without LED illuminators):
• Operational: up to 160km/h
• Stationary: up to 210km/h
• Surge immunity: up to 2kV line to line, up to 4kV line to earth (Class 4)

Certifications

• Electrical safety (CE): EN60950-1, IEC60950-1
• Electromagnetic compatibility (CE): EN50130-4, EN55022 (Class A), EN610000-6-3, FCC Part 15 (Class B)
• Outdoor installation (CE): EN60950-22, IEC60950-22
• Photobiological safety (CE): EN62471 (LED illuminators)
• IP protection degree: EN60529 (IP66)
• Salty fog resistance: EN50130-5, EN60068-2-52
• UL certification: cULus Listed (TYPE 4X) (not for thermal cameras version)
• EAC certification

UPT2SVWA000E Specifications PDF