[DISCONTINUED] UPT2SMWA000E Videotec Outdoor PTZ Unit 24VAC with Wiper

ULISSE PLUS is a robust and efficient Pan/Tilt/Zoom unit designed to give dynamic, non-stop surveillance of large outdoor areas whilst withstanding harsh weather conditions, thereby reducing maintenance to zero.
The accurate top-mount configuration guarantees long-range vision and continuous horizontal axis rotation, combining high speed with absolute tracking accuracy, both in manual mode and in patrol mode.

Specifications

General

• Constructed from aluminium and tecnopolymer
• Epoxypolyester powder painting, RAL9002 colour
• Top mount (OTT)
• Transmission through toothed belt
• Slip-ring
• Electronic limit switches
• Simplified installation thanks to the connector and easy replacement on-site
• Zero backlash
• Optical sensors for absolute positioning feedback
• Integrated wiper
• Configuration of telemetry protocol parameters through dip-switch for RS-485
• Maximum number of presets for protocol: 250 (VIDEOTEC MACRO)
• 15 characters string for Area and Preset titling
• Configuration through OSM

Mechanical

• Cable glands: 3xM16
• Horizontal rotation: 360^º, continuous rotation
• Vertical rotation: from -40^º up to +90^º
• Horizontal speed (variable): from 0.02^º/s up to 100^º/s (from 0.02^º/s up to 40^º/s, with LED illuminators)
• Tilt speed (variable): from 0.02^º/s up to 50^º/s (from 0.02^º/s up to 30^º/s, with LED illuminators)
• Internal usable area: See drawings
• Accuracy of preset positions: 0.02^º
• Unit weight: 17.3kg (38lb) (17.8kg (39.2lb) with LED illuminators bracket)

Electrical

• Supply voltage/Current consumption:
• 230Vac, 0.4A, 50/60Hz
• 24Vac, 4A (8A with LED illuminators), 50/60Hz
• 120Vac, 0.8A, 50/60Hz
• Power consumption:
• 100W
• 150-190W max with LED illuminators in 24Vac
• 28.5W, P&T static, heating switched off
• Camera power supply: 12Vdc, 800mA
• Cables input section:
• 0.75mm² (18AWG), 120Vac or 230Vac
• 1.5mm² (16AWG), 24Vac
• Cables signal section: from 0.14mm² (26AWG) up to 0.5mm² (20AWG)
• Housing heater (standard): 20W max

Communications

• RS-232 interface for firmware update
• 2-ports RS-485 for daisy chain configuration
• Addressable through dip-switch up 255 units

Video

• Video line: coaxial cable (1Vpp, 75Ohm)

Protocols

• Configuration of telemetry protocol parameters through dip-switch
• Serial communication protocol: AMERICAN DYNAMICS, PANASONIC, PELCO D, VIDEOTEC MACRO, VISTA

Environment

• For installation indoors and outdoors
• Operating temperature
• With heater: -20^ºC (-4^ºF)/+60^ºC (140^ºF)
• With reinforced heater: -30^ºC (-22^ºF )/+60^ºC (140^ºF)
• Surge immunity: up to 2kV line to line, up to 4kV line to earth (Class 4)
• Relative humidity: from 10% up to 95% (no condensation)

Certifications

• Electrical safety (CE): EN60950-1, IEC60950-1
• Electromagnetic compatibility (CE): EN50130-4, EN610000-6-3, EN55022 (Class B), FCC Part 15 (Class B)
• Outdoor installation (CE): EN60950-22, IEC60950-22
• IP protection degree: EN60529 (IP66)
• Salty fog resistance: EN50130-5, EN60068-2-52
• UL certification: cULus Listed (TYPE 4X)
• EAC certification

UPT2SMWA000E Specifications PDF