DTMRX2 Videotec Telemetry receiver 12 functions 230Vac

The DTMRX2 is a digital receiver, controlled by a microprocessor, for remote control of a Pan & Tilt motor and a motor-driven zoom lens.
The DCJ, DCTEL and SM matrix series control units ensure complete control of all the DTMRX2 functions. It is also interfaced to a PC through RS232. Connection to the control unit can be RS232 or RS485.

Specifications

General

• 12 Functions: UP, DOWN, LEFT, RIGHT, AUTO, ZOOM TELE, ZOOM WIDE, FOCUS NEAR, FOCUS FAR, IRIS OPEN, IRIS CLOSE, AUX
• 99 identification addresses, selectable by dip switches
• RS232, RS485 selectable communication
• Repeater RS232 or RS485 for daisy chain configuration
• Ability of using both polarity inversion lenses and common wire lenses
• EEPROM for storing activated functions
• LED indicating power supplied to the unit
• LED indicating command reception
• LED indicating data reception
• Supplied with instruction manual, 2 PG11 blanking caps, 4 wall mounts with relevant fastening screws

Mechanical

• Plastic material enclosure
• 4 PG11 cable glands
• Dimensions: 225x154x81mm (9x6x3in)
• Unit weight: 1kg (2.2lb)

Electrical

• Supply voltage: 230Vac, 50/60Hz
• Consumption: 10W
• Max. switching power 100W
• Power supplied to the positioning device: 230Vac, 50/60Hz
• Power supplied to the lens: from 3Vdc to 14Vdc, 100 mA max
• AUX: auxiliary dry contact 1A 230Vac or 1A 24Vac
• Protection fuse: F1: F 250mA L 250V

Protocols

• PELCO D (2400 baud)
• VIDEOTEC (1200, 9600, 19200, 38400 baud)
• VIDEOTEC MACRO (1200, 9600, 19200, 38400 baud)
• PELCO is registered trademark.
• The product may be interfaced with devices not manufactured by VIDEOTEC. It is possible that the interface protocols have changed or are in a different configuration from earlier tested units by VIDEOTEC. VIDEOTEC recommends a test prior to installation. VIDEOTEC will not be liable for any installation costs or lost revenues in the event a compatibility problem will occur.

Communications

• Selectable communication speed
• Repeater RS232 or RS485 for daisy chain configuration
• Telemetry data input RS485 on Matrix Series SM serial output for a max distance of 1200m (3937ft)
• Telemetry data input RS485 on keyboard serial output, max distance of 1200m (3937ft)
• Telemetry data input RS232 for PC or keyboard control for a max distance of 15m (49ft)

Environment

• Indoor/Outdoor
• Operating temperature: -20^ºC / +50^ºC (-4^ºF / 122^ºF)

Certifications

• Electrical safety (CE): EN60065
• Electromagnetic compatibility (CE): EN50130-4, EN55022 (Class B), FCC Part 15 (Class B)
• IP protection degree: EN60529 (IP56)
• EAC certification

DTMRX2 Specifications PDF