The cart is empty.

Dealers. First. Always.

Set up a dealer account with DWG (Quick & Easy). Click Here

Sign In Checkout Help

The cart is empty.

Categories > Fire & Safety > Fire Alarm Communications

[DISCONTINUED] SLE3/4G-CFB Napco StarLink Commercial Fire/ Burglary, GSM, Red Enclosure - Powered by Control Panel - AT&T

[DISCONTINUED] SLE3/4G-CFB Napco StarLink Commercial Fire/ Burglary, GSM, Red Enclosure - Powered by Control Panel - AT&T

[DISCONTINUED] SLE3/4G-CFB Napco StarLink Commercial Fire/ Burglary, GSM, Red Enclosure - Powered by Control Panel - AT&T

[DISCONTINUED] SLE3/4G-CFB Napco StarLink Commercial Fire/ Burglary, GSM, Red Enclosure - Powered by Control Panel - AT&T

[DISCONTINUED] SLE3/4G-CFB Napco StarLink Commercial Fire/ Burglary, GSM, Red Enclosure - Powered by Control Panel - AT&T

SKU: SLE3/4G-CFB

Battery connection red and black flying leads
Monitored battery charging and Active battery test circuits
Requires a sealed lead acid min 4AH / max 7AH battery for minimum 24-hour standby time (max charge current 200mA).
Trouble relay output (C, N/O and N/C terminals) to wire to a panel zone dedicated to "Radio Trouble" (dry contacts). Remove jumper "J2" to isolate common from ground
Green AC ON LED visible from the exterior housing
Yellow TROUBLE LED on PC board. Flashes signify: One flash: AC fail / brownout (2 hour delay) Two flashes: Low battery Three flashes: Charging circuit trouble Four flashes: StarLink radio trouble

More details...

Ordering Notes: Dealers Only

MSRP Price: $340.00

Web Price: $340.00

DISCONTINUED

Save to my Wish List

Product Details

Specifications

Electrical Ratngs for the IN 1 Burg/Fire Input:

Input Voltage: 9-15VDC.
Maximum Input Current: Up to 2mA from FACP NAC circuit

Electrical Ra􀆟ngs for IN 2 and IN 3:

Maximum Loop Voltage: 15VDC.
Maximum Loop Current: 1.2mA
End of Line Resistor (EOLR) Value: 10K (2 req'd)

Electrical Ratngs for 3 PGM Outputs:

Open Collector Outputs: Maximum Voltage 3V when active; 15V maximum when not active.
Maximum PGM Sink Current: 50mA (up to 15VDC), 25mA (15.1VDC - 25VDC)

Physical (W x H x D)

Metal Housing: 111/2 x 91/2 x 31/2" (29.2 x 24.1 x 8.9cm)
Mounting: Metal housing includes two keyhole slots for wall mounting

Environmental

Operating Temperature: 0^ºC - 49^ºC (32^ºF - 120^ºF)
Humidity: Maximum 93% Non-Condensing
Indoor / dry location use only

SLE3/4G-CFB Specifications PDF

Back to the top

DWG - 800 Shames Drive , Westbury , NY 11590 , USA - 516-933-4900

Connect with us on Social Media

Instagram

Linked In