MCLN2-M1A-WSA-B KBC Networks Industrial Two Channels 10/100M Ethernet Media Converter

The KBC MCLN2 series is an industrial two channels 10/100M Ethernet media converter. It supports transmission of two channels 10/100Base-T Ethernet over either one or two, multimode or single mode optical fibers with full duplex operation. Typically the two channels media converter is installed in remote end, in head end compatible one channel media converter MCLN1 series is installed.

Specifications

Standards

• IEEE Standards
  • IEEE802.3 10Base-TX
  • IEEE802.3u 100Base-TX
  • IEEE802.3u 100Base-FX

Electrical

• Data Port - 2
• Data Rate - 10/100Mbps Auto-Sensing Half & Full Duplex
• Surge Protection - 2kV

Optical

• Port - 1
• Wavelength
  • 1 fiber SM&MM - 1310nm/1550nm
  • 2 fibers SM&MM - 1310nm
• Fiber - 1 or 2, MM (50/62.5/125μm), SM (9/125μm)
• Typical Loss Budget - 12dB
• Typical Distance (1)
  • MM - 2km
  • SM - 20KM
  • Longer distance is available

Power

• Power Input - +12Vdc Power consumption - < 3W Power Supply (2)
  • Input - 100 ~ 240Vac
  • Output - +12Vdc
• Chassis Card - Supplied from FR2 PSU

Environmental

• Operating Temperature - -40° ~ +75°C
• Storage Temperature - -40° ~ +85°C
• Operating Humidity - 0 to 95% non-condensing
• Mean Time Between Failure (MTBF) - > 100,000 Hours

Enclosure Protection - IP40

Connectors

• 10/100M Electrical - RJ-45
• Fiber (3) - FC, SC or ST
• Power (4) - Screw Block Terminal

Others

• Cable - CAT5 or CAT6, direct or cross cable
• LEDs - Connection status data sending & receiving

MCLN2-M1A-WSA-B Specifications PDF