MCLN1-S1B-WSA-B KBC Networks Industrial one channel 10/100M Ethernet Media Converter

The KBC MCLN1 series is an industrial 10/100M Ethernet media converter(MC). It supports transmission of one channel 10/100Base-T Ethernet over either one or two, multimode or single mode optical fibers with full duplex operation. Plug-and-play design makes installation straightforward, with no electrical or optical adjustment needed. LED indicators are provided to show the operational status of the unit. Rugged design in both enclosure and electrical protection makes it suit for application in harsh environment.

Specifications

Standards

• IEEE Standards
  • IEEE802.3 10Base-TX
  • IEEE802.3u 100Base-TX
  • IEEE802.3u 100Base-FX

Electrical

• Data Port - 1
• Data Rate - 10/100Mbps Auto-Sensing Half & Full Duplex
• Surge Protection - 2kV

Optical

• Port - 1
• Wavelength
  • 1 fiber SM&MM - 1310nm/1550nm
  • 2 fibers SM&MM - 1310nm
• Fiber - 1 or 2, MM (50/62.5/125μm), SM (9/125μm)
• Typical Loss Budget - 12dB
• Typical Distance (1)
  • Multimode - 2km
  • Singlemode - 20km
  • Longer distance is available

Power

• Power Input - +12Vdc
• Power consumption - < 3W
• Power Supply (2)
  • Input - 100 ~ 240Vac
  • Output - +12Vdc
• Chassis Card - Supplied from FR2 PSU

Environmental

• Operating Temperature - -40° ~ +75°C
• Storage Temperature - -40° ~ +85°C
• Operating Humidity - 0 to 95% non-condensing
• Mean Time Between Failure (MTBF) - > 100,000 Hours

Enclosure Protection - IP40

Connectors

• 10/100M Electrical - RJ-45
• Fiber (3) - SC, FC or ST
• Power (4) Wall Mount/DIN Rail - Screw Block Terminal

Others

• Cable - CAT5 or CAT6, direct or cross cable
• LEDs - Connection status data sending & receiving

MCLN1-S1B-WSA-B Specifications PDF